Help Guide

Recording from external equipment (using the synchronized recording function)

You can make music files without using the computer by recording sound/music from other equipment such as a radio cassette recorder, a tape recorder, etc. connected to the IC recorder.

When the synchronized recording function is set to “ON,” the IC recorder enters the recording pause mode when no sound is detected for more than 2 seconds.

The IC recorder starts recording again as a new file when sound is detected.

Hint

If the input level is not strong enough, connect the headphone jack (minijack, stereo) of other equipment to the jack of the IC recorder and adjust the volume level on the piece of equipment connected to the IC recorder while checking the recording level guide.

Connect a piece of external equipment () to the jack of the IC recorder when the IC recorder is in the stop mode.

Connect the audio output connector (stereo mini-plug) of other equipment to the jack of the IC recorder using an audio connecting cable (not supplied).

“Select Input” appears in the display window.

If “Select Input” is not displayed, set it in the menu.
Press or to select “Audio IN,” and then press .

“Use SYNC REC Function To Record?” appears on the display.
Press or to select “Yes,” and then press .
The synchronized recording setting is set to on.
Press REC/PAUSE.
“” flashes and the IC recorder enters the recording pause mode.
Start playback on the piece of equipment connected to the IC recorder.
“” appears on the display and synchronized recording starts.