SteadyShot Settings
You can shoot with an appropriate [SteadyShot] setting for the attached lens.
- MENU →
(Camera Settings) → [SteadyShot] → [On] - [SteadyShot Settings] → [SteadyShot Adjust.] → desired setting.
Menu item details
- Auto:
- Performs the SteadyShot function automatically according to the information obtained from the attached lens.
- Manual:
- Performs the SteadyShot function according to the focal-length set using [SteadyS. Focal Len.]. (8 mm-1000 mm)
- Check the focal-length index (A) and set the focal-length.
- Check the focal-length index (A) and set the focal-length.
Note
- The SteadyShot function may not work optimally when the power has just been turned on, right after you point the camera towards a subject, or when the shutter button has been pressed all the way down without stopping halfway.
- When using a tripod, make sure to turn off the SteadyShot function because this can cause any malfunction when shooting.
- [SteadyShot Settings] will be unavailable when MENU → (Camera Settings) → [SteadyShot] is set to [Off].
- When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual] and set [SteadyS. Focal Len.] to match the lens you are using. The current set value of the SteadyShot focal length will display to the side of
. - When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal length.
- When you turn [SteadyShot] [On]/[Off], the in-body/in-lens SteadyShot settings switch at the same time.
- If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You cannot switch the settings using the camera.