Pairing the unit with the mounted camera

Establish a Bluetooth connection between this unit and a camera.

Before establishing a Bluetooth connection, you must pair the unit with the camera (device registration).

Note

  • The following is an example of the mounting procedure for Sony Interchangeable Lens Digital Cameras and Sony digital still cameras.

  • Before you start pairing, make sure that the LOCK switch on this unit is NOT in the “LOCK” position.

  1. On the camera, select MENU → (network) → [Bluetooth Settings] → [Bluetooth Function] → [On].
  2. On the camera, select MENU → (network) → [Bluetooth Rmt Ctrl] → [On].

    If the pairing screen appears on the camera's screen, proceed to step.

  3. On the camera, select MENU → (network) → [Bluetooth Settings] → [Pairing].
  4. On this unit, press and hold the PHOTO button () and the T side of the Zoom button () simultaneously for at least 7 seconds.

  5. When a confirmation message appears on the camera's screen, select [OK].

    appears and pairing begins.

    When pairing is complete, [Paired.] appears.

Note

  • If pairing fails, the indicator on this unit flashes rapidly. If this happens, repeat the procedure all over again.

    • A pairing attempt times out when a certain amount of time elapses between the actions in step and step .

  • In the event of the following, pair this unit with the mounted camera all over again.

    • You mounted a different camera on this unit for operation. (When you replaced the camera back with the previously mounted one, you must pair the unit with the mounted camera all over again as well.)

    • You reset the camera's network settings.

  • If this unit is kept unused while a Bluetooth connection is established,(no Bluetooth connection) may appear on the camera’s screen.