Video Input

Configured devices

You can select the device to control or to set as the tuner.


Press Fn + 1 and select [Video Input] - [Configured devices], then select the device you want to set up.


List of configured devices

You can make settings for devices shown in this list, and control them with the Keypad. The built-in tuner and DISH Network enhanced DVR integration devices are shown in the list of available sources when removed.

  • HDMI1 - 4, Video/Component:
    You can assign a name to the input.
    Select the input you want to set. To assign a name, either select [Manage inputs] - [Label] and choose a label, or choose [Edit] to create a custom label and then input characters.
List of available sources

To add a device, select it from the list.

  • Add device manually:
    You can add a device you want to control using the IR Blaster.
To add/remove a device compatible with the Control for HDMI function:

When you connect a device compatible with the Control for HDMI function, the device is listed as a configured device and the name appears automatically in the list of configured devices. To remove a device compatible with the Control for HDMI function, disconnect the device. The device name disappears from the list of configured devices.

To hide channels

Select [Built-in tuner] from the list of configured devices, then select [Edit channel list]. Check the box of the channel you want to hide.

To select the device to launch using the TV key

Select the device to use as a tuner from the list of configured devices, then select [Make default TV device]. Only one device can be set as the default at a time.
A mark appears next to the device name in the list of configured devices. Press TV to launch the device.

Note

  • [HDMI 1] - [HDMI 4], [Video/Component], and devices equipped with the Control for HDMI function cannot be set to [Make default TV device].
To remove the device

Select the device you want to remove from the list of configured devices, then select [Disconnect device]. The built-in tuner and DISH Network enhanced DVR integration devices are shown in the list of available sources when removed.

Return to Top

HDMI settings

You can control devices equipped with the Control for HDMI function with the Keypad. Confirm that the devices are connected properly to the TV with HDMI connections.


Press Fn + 1 and select [Video input] - [HDMI settings].

  • Control for HDMI:
    Select [On] to link operations of the TV and the connected devices equipped with the Control for HDMI function.
  • Device auto power off:
    Select [On] to turn off devices equipped with the Control for HDMI function when the TV is turned off.
  • TV auto power on:
    Select [On] to turn on the TV when devices equipped with the Control for HDMI function are turned on.
  • Device list:
    Select [Enable] to turn on the Control for HDMI function for the devices shown on the list.

Return to Top

Built-in tuner settings

Press Fn + 1 and select [Video input] - [Built-in tuner settings].

  • Channels:
    Cable/Antenna: Select the input source of the signal.
    Auto program: Automatically scans and sets all available channels based on the Cable/Antenna setting. Current channels will be cleared and new available channels will be set.
    Add digital channels: Adds available digital channels based on the Cable/Antenna setting. Current channels are not cleared.
    Program information source: Select [Rovi Guide] to view program data from it.
    Analog fine tune: Select [Custom] to fine-tune a channel manually, use the left and right keys to fine-tune it.
  • Signal diagnostics:
    You can view diagnostic information for the current signal. To view diagnostic information such as Frequency (kHz) and Status, select a channel currently being received via antenna/cable. Information is displayed for these items, but operations cannot be carried out here.

Note

  • The Errors/SNR/IF-AGC/Interleaving items are available only for Digital channels.

Return to Top

Video/Component selection

Set the input method for signals from the Y (VIDEO IN) jack.


Press Fn + 1 and select [Video input] - [Video/Component selection].

  • Auto:
    Automatically detects the type of video connection used.
  • Video:
    Select when using a composite video cable.
  • Component:
    Select when using a component video cable.

Return to Top