Pairing and connecting with a BLUETOOTH device
-
Place the BLUETOOTH device within 1 meter (3 feet) of the headset.
-
Enter pairing mode on the headset.
-
If pairing is not established within about 5 minutes, pairing mode will be cancelled and the headset will turn off. In this case, start over from step 1.
-
Perform the pairing procedure on the BLUETOOTH device to detect the headset.
-
Make the BLUETOOTH connection from the BLUETOOTH device.
-
To pair with other BLUETOOTH devices, repeat steps 1 to 4 for each device.
-
To delete all pairing information, see “What can I do to solve a problem?” [Details]
-
For details, refer to the operating instructions supplied with the BLUETOOTH device.
-
When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display, you may pair the device by setting both the headset and the BLUETOOTH device to pairing mode. At this time, if passkey is set besides “0000” on the BLUETOOTH device, pairing cannot be done with the headset.
-
Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases:
-
Pairing information is deleted after repair, etc.
-
The headset is paired with 9 or more devices. The headset can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.
-
When recognition of the headset by the device to be connected is deleted.
-
The headset is initialized. All pairing information is deleted.