Replacing the fitting supporters

The fitting supporters come attached to the left and right headset units at the time of purchase.

The left and right fitting supporters are different shapes.

  1. Remove the fitting supporter.

    Remove the fitting supporter from the headset so that the protruding dot does not catch in the hole of the fitting supporter.

  2. Attach the fitting supporter.

    Fit the bottom part of the fitting supporter onto the headset and pass the protruding dot on the headset through the hole in the fitting supporter as shown.

  3. Check that the fitting supporter is securely fitted onto the headset.

    Check that the fitting supporter properly encases the housing part of the headset.

About the instruction manual video

Watch the video to find out how to replace the fitting supporters (audio explanation is not available).

https://rd1.sony.net/help/mdr/mov0075/h_zz/

Note

  • Handle the fitting supporters carefully and refrain from pinching them with your fingernails.
  • Do not forcefully pull at the tips of the fitting supporters.
  • Wipe the fitting supporters clean before attaching them to the headset.