Replacing the fitting supporters

The fitting supporters come attached to the left and right headset units at the time of purchase.

The left and right fitting supporters are different shapes.

  1. Remove the fitting supporter.

  2. Attach the fitting supporter.

    Hook the bottom part of the fitting supporter into the groove on the headset and align the opening in the fitting supporter with the microphone on the headset as shown.

  3. Check that the fitting supporter is securely fitted onto the headset.

    Check that the fitting supporter properly encases the housing part of the headset.

About the instruction manual video

Watch the video to find out how to replace the fitting supporters (audio explanation is not available).

https://rd1.sony.net/help/mdr/mov0082/h_zz/

Note

  • Handle the fitting supporters carefully and refrain from pinching them with your fingernails.
  • Do not forcefully pull at the tips of the fitting supporters.
  • Wipe the fitting supporters clean before attaching them to the headset.