| Charging the headset

Charging the headset

The headset contains a lithium ion rechargeable battery, which should be charged before using the headset for the first time.

System requirements for battery charge using USB

Personal Computer with pre-installed with any of the following operating systems and USB port:

Operating Systems

(when using Windows)

Windows® 8 / Windows® 8 Pro

Windows® 7

Home Basic / Home Premium / Professional / Ultimate

Windows Vista® (Service Pack 2 or later)

Home Basic / Home Premium / Business / Ultimate

Windows® XP (Service Pack 3 or later)

Home Edition / Professional / Media Center Edition 2004 / Media Center Edition 2005

(when using Macintosh)

Mac OS X (version.10.3 or later)

Charging the headset

Open the cover of the micro-USB port.

Connect the supplied micro-USB cable to the headset, and then connect the other end to a computer booted.

Make sure that you connect the plug of the micro-USB cable in the direction as shown in the illustration below.

Charging starts when the headset and the computer are connected.

Make sure that the indicator (red) lights up. Charging is completed in about 1.5 hours* and the indicator (red) goes off automatically.

* Time required to charge the empty battery to its full capacity

Notes

Use the micro-USB cable supplied. You may not be able to charge the headset with other cables.

If the headset is not used for a long time, the indicator (red) may not light up when you connect the micro-USB cable to charge the headset. In this case, do not disconnect the micro-USB cable from the headset and wait until the indicator (red) lights up.

Tips

If the micro-USB cable is connected to a computer while the headset is turned on, the headset will be turned off automatically.

The headset cannot be turned on while charging the battery.

Caution

If the headset detects a problem while charging, the indicator (red) may turn off, although charging is not complete.

Check for the following causes:

Ambient temperature exceeds the range of 5 °C – 35 °C.

There is a problem with the battery.

In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer.

Notes

If the headset is not used for a long time, the battery may be quickly depleted, however, after a few recharges, the battery life will improve.

Even if you do not intend to use the headset for a long time, charge the battery to its full capacity once every 6 months to maintain its performance.

If the headset is not used for a long time, it may take longer to charge the battery.

If the life of the built-in rechargeable battery drops to half the normal length, the battery should be replaced. Consult your nearest Sony dealer for replacement of the rechargeable battery.

Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave the headset in a car parked in the sun.

If the computer enters into hibernation mode while connected to the headset, charging will not be completed properly. Check the setting of the computer before charging. The indicator (red) will go off automatically even if the computer enters into hibernation mode. Charge the headset again in this case.

Use the supplied micro-USB cable only, and connect directly to a computer. Charging will not be completed properly by an indirect connection, such as via a USB hub.

Usage hours

Status	Approx. usage hours
Communication time (including music playback time) (up to)	9 hours
Standby time (up to)	120 hours

Time stated above may vary, depending on ambient temperature or conditions of use.

Checking the remaining battery

When you turn on the headset by pressing the

POWER button, the indicator (red) flashes. You can check the remaining battery by the number of times the indicator (red) flashes.

Indicator (red)	Status
3 times	Full
2 times	Mid
1 time	Low (needs to charge)

When the battery is almost empty

The indicator turns red. When the battery becomes empty, the headset sounds a beep and turns off automatically.