Contents listConnection example 1: Connecting the processor with devices without using an AV amplifier (ARC equipped TV)
The Control for HDMI function of the processor works most effectively with this connection.
When you connect an AV amplifier, a theater rack, or a sound bar with HDMI jacks, etc., see Connection example 3: Connecting the processor with devices via an AV amplifier (ARC equipped TV) or Connection example 4: Connecting the processor with devices via an AV amplifier (TV not equipped with ARC).
Tip
-
What is ARC? [Details]
Note
-
The Control for HDMI function is disabled in the default setting. To use the Control for HDMI function, set [Control for HDMI] to [On] on the menu of the processor. [Details]
-
Set the CONTROL FOR HDMI switch to “MODE1” (default setting).
-
Connect a TV, a BD/DVD device and/or a game device to the jacks on the rear of the DP-HW700 processor.
If the devices are connected to the TV, disconnect them from the TV, and connect them to the processor.
: audio signal
: video signal
: audio signal of TVHDMI IN: HDMI input
HDMI OUT: HDMI output
OPTICAL OUT: optical digital output
Connect a TV with an HDMI cable (High Speed type) (sold separately).The TV sound is sent to the processor via the HDMI cable.
Normally, only the Number 1 jack of the HDMI input jacks on a TV supports ARC. Make sure that you are connecting the processor to the correct HDMI input jack on the TV.
Connect a BD/DVD device and/or a game device with an HDMI cable (High Speed type) (sold separately).
Connect the AC adaptor supplied.Note
-
Turn off the processor or set it to standby mode before you operate the CONTROL FOR HDMI switch.
