About the indicators
POWER/CHG (power/charge) indicator
When the headphone amplifier is being charged, the indicator flashes/lights up in red.
When the headphone amplifier is turned on, the indicator flashes/lights up in green.
The the power/volume knob is in the off position
- Turns off
- The headphone amplifier is fully charged.
- Lights up (red)
- The headphone amplifier is being charged.
- Flashes (red)
- The headphone amplifier is not being charged properly.
- Reconnect the headphone amplifier.
The the power/volume knob is in the on position
You can check the battery level by the number of times that the indicator flashes when the headphone amplifier is turned on.
- Lights up (green)
- The headphone amplifier is turned on.
- Flashes three times (green)
- The battery is substantially charged.
- Flashes twice (green)
- The battery is half charged.
- Flashes once (green)
- The battery level is low. It is necessary to charge the battery.
- Continuous flashing (green)
- If you continue to use the headphone amplifier without charging, it will turn off in a few minutes.
- When the POWER/CHG (charge) of the headphone amplifier indicator turns off because the remaining battery power becomes low after being used for a long time, the POWER/CHG (charge) indicator lights up in red if you connect the DC IN 5V port of the headphone amplifier to a computer or other device. The headphone amplifier cannot be charged or turned on in this state. In this case, turn the power/volume knob of the headphone amplifier to the off position and charge it. After charging, the POWER/CHG (charge) indicator lights up in green and the headphone amplifier turns on when the power/volume knob is turned to the on position.
Connection error indications for the iPhone/iPad/iPod connection INPUT port
- Flashes one time about every three seconds
- An incompatible device is connected to the iPhone/iPad/iPod connection INPUT port.
- Flashes two times about every three seconds
- A USB hub is connected to the iPhone/iPad/iPod connection INPUT port.
- Connect the device directly without the USB hub.
- Flashes three times about every three seconds
- The headphone amplifier is not connected to iPhone/iPad/iPod properly.
- Reconnect them properly.