HDD AUDIO PLAYER SYSTEMHAP-S1

Design and specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION (for the USA and Canada only):

With 4 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 32 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

POWER OUTPUT (models except for China): 40 W + 40 W (4 ohms, 1 kHz, THD 10%)

POWER OUTPUT (models for China): 38 W + 38 W (4 ohms, 1 kHz, THD 10%)

Rated Power Output (models except for China): 35 W + 35 W (4 ohms, 1 kHz, THD 0.9%)

Speaker impedance match: 4 ohms - 16 ohms

S/N ratio: 100 dB (20 kHz LPF, A Network)

Frequency response: 10 Hz - 100 kHz (+0 dB, –3 dB) (4 ohms, LINE IN)

Network section

Wired LAN

1000BASE-T/100BASE-TX/10BASE-T

Wireless LAN

Compatible standards: IEEE 802.11 b/g/n

Frequency band/channel: 2.4 GHz band, channels 1-11 (models for the USA and Canada), channels 1-13 (models for Europe)

HDD section

Capacity

500 GB (*)

* Some portions of the capacity are used for data management. Therefore, the capacity a user can use is less than 500 GB.

Supported playback format

DSD (DSF, DSDIFF), LPCM (WAV, AIFF), FLAC, ALAC, ATRAC Advanced Lossless, ATRAC, MP3, AAC, WMA (2 channels)

Jack section

Input section

COAXIAL IN
Input impedance: 75 ohms
Supported playback format: LPCM 2ch
  • Sampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
  • Quantization bits: 16 bits, 24 bits
OPTICAL IN
Supported playback format: LPCM 2ch
  • Sampling frequency: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Quantization bits: 16 bits, 24 bits
LINE IN 1, 2
Input sensitivity: 500 mV
Input impedance: 100 kilohms

Output section

Output jacks

LINE OUT
Output impedance: 2.2 kilohms
2 Hz - 80 kHz (–3 dB)
PHONES (headphone jack)
Stereo jack: 8 ohms or higher

EXT port

Type A USB, Hi-Speed USB

General and others

Power requirements

Models for the USA and Canada: AC 120 V 60 Hz

Models for Europe: AC 230 V 50/60 Hz

Models for China: AC 220 V 50 Hz

Power consumption

Models for the USA and Canada
On: 80 W
During standby mode (when [Network Standby] is set to [Off]): 0.3 W
During standby mode (when [Network Standby] is set to [On] and a wired LAN is used): 2.6 W
During standby mode (when [Network Standby] is set to [On] and a wireless LAN is used): 2.8 W
Models for Europe and China
On: 85 W
During standby mode (when [Network Standby] is set to [Off]): 0.3 W
During standby mode (when [Network Standby] is set to [On] and a wired LAN is used): 2.6 W
During standby mode (when [Network Standby] is set to [On] and a wireless LAN is used): 2.8 W

Dimensions (approx.) (w/h/d)

265 mm × 88 mm × 304 mm (10 1/2 in. × 3 1/2 in. × 12 in.) including projecting parts and controls

Mass (approx.)

5.8 kg (12 lbs 12 5/8 oz)

Supplied accessories

See “Supplied accessories.”

Design and specifications are subject to change without notice.