IC RecorderICD-BX132

Print

Adding a recording to a previously recorded file (ADD)

You can add a recording to the file being played back. The added recording will be placed after the current file, and will be counted as a part of the file.

A: During playback of file 3

B: After adding a recording

C: Added recording

  1. In the stop mode, press MENU to enter the menu mode.
  2. Press souni_cue_fr or souni_cue_ff to select “REC-OP,” and then press souni_playPLAY/ENTER.

  3. Press souni_cue_fr or souni_cue_ff to select “ON,” and then press souni_playPLAY/ENTER.
  4. Press souni_cue_fr or souni_cue_ff to select “ADD,” and then press souni_playPLAY/ENTER.
  5. Press souni_stop(stop) to exit the menu mode.
  6. When the file to be added is played back, press souni_recREC/PAUSE.

    and “ADD” flash and the IC recorder stops in the recording pause mode.

  7. While “ADD” is flashing, press souni_recREC/PAUSE.

    The operation indicator lights in red, and the recording is added at the end of the current file.

  8. Press souni_stop(stop) to stop recording.

Descriptions of menu items

You can select one of the menu items available.

ON:

The REC-OP function is active. You can add recording to the file being played, by selecting “ADD” after selecting “REC-OP.”

OFF:

The REC-OP function does not work.

(Initial setting)

Note

  • You cannot add a recording if the remaining memory is insufficient.
  • You cannot add a recording to a protected file. To add a recording, release the protection first.
  • The added portion of a file will be recorded in the same recording mode.
  • If 10 minutes have passed after step 6, you must start the procedure again from the beginning.
Go to Page Top
4-448-103-11(1)
© 2013 Sony Corporation