Home Audio SystemCMT-SX7/SX7B

Connecting to a wired network

This section describes how to connect the home audio system to a wireless router with a commercially-available LAN cable, then how to connect the router to the computer.

Usually the DHCP setting is set to ON when you connect your computer to the network.

Do the following before starting.

  • Set the DHCP setting of your computer to ON.
  1. Check that your computer and wireless router are turned on.
  2. Connect the wireless router to the LAN port with a commercially-available LAN cable.
  3. Connect the wireless router to your computer using another commercially-available LAN cable, or a Wi-Fi connection.

  4. Turn the home audio system on.

    The standby indicator lights up in yellow-green, then the mark starts flashing in the display window.

    When the connection is complete, the mark goes from flashing to always lit.

    Hint

    • Wait about two minutes (in some cases, four or five minutes) until the mark goes from flashing to always lit when you connect the home audio system to a network for the first time after purchase.

Note

  • When you connect the home audio system to a network for the first time after purchase, or after you initialize the home audio system, the BLUETOOTH/Network standby function is turned on automatically.
Go to Page Top