Pairing additional devices with the sensor.
How to register the Smart Tennis Sensor will be each explained for Android devices and iOS devices.
For Android Devices:
STEP 1: Prepare the Smart Tennis Sensor
Turn the Tennis Sensor on by pressing the Power button for two seconds. (The red or blue light will slowly turn on.)
Hold down the Bluetooth button.
Although the blue light turns on immediately after the button is pressed, continue to hold the button down for more than seven seconds.
The blue light will respond by flashing softly.
Hint
- The key to this operation is continuing to hold the button without letting go, even after the blue light turns on.
STEP 2: Prepare the Android device
Turn the power of the Android device off.
Turn the power of the Android device on.
Tap "Settings."
Turn the "Bluetooth" switch to on and tap the word "Bluetooth."
Hint
- The wording and steps involved with turning the Bluetooth settings ON may be different depending on the device being used.
Please refer to the instruction manual of the device being used for further details.
STEP 3: Start the pairing
Tap "Search for Device" at the top of the screen for Bluetooth settings.
(Depending on the model, select "Search for Device" from the "Menu" button.)
Confirm that [SSE-TN1...] is displayed in the list of "Available Devices."
Tap this listed item and confirm that the status of [SSE-TN1...] has changed to [Connected].
Pairing will start. Once the process has been completed, the blue light on the Smart Tennis Sensor will flash four times.
Return to the HOME screen with the HOME button and start the "Smart Tennis Sensor" app. If the message "sensor is connected" is displayed beside an illustration of a racket, then configurations have been completed.
Hint
- Please inquire by e-mail if you are unable to complete registration by following the above steps.
Regarding items to include when making an inquiry:
- Inquiry by E-Mail
For iOS Devices:
STEP 1: Prepare the sensor
Turn the Tennis Sensor on by pressing the Power button for two seconds. (The red or blue light will slowly turn on.)
Hold down the Bluetooth button.
Although a blue light turns on immediately after the button is pressed, continue to hold the button down for more than seven seconds.
The blue light will respond by flashing softly.
Hint
- The key to this operation is continuing to hold the button without letting go, even after the blue light turns on.
STEP 2: Prepare the iOS device
Turn the power of the iOS device off. (Turn the power off by holding down the lock button of the iOS device.)
Turn the power of the iOS device on.
Tap "Settings."
Check under "Bluetooth" and confirm that the switch is on.
STEP 3: Start the pairing
Tap "Search for Device" at the top of the screen for Bluetooth settings.
(Depending on the model, select "Search for Device" from the "Menu" button.)
Confirm that [SSE-TN1...] is displayed in the list of "Available Devices."
Tap this listed item and confirm that the status of [SSE-TN1...] has changed to [Connected].
Pairing will start. Once the process has been completed, the blue light on the Smart Tennis Sensor will flash four times.
Return to the HOME screen with the HOME button and start the "Smart Tennis Sensor" app. If the message "sensor is connected" is displayed beside an illustration of a racket, then configurations have been completed.
Hint
- Please inquire by e-mail if you are unable to complete registration by following the above steps.
Regarding items to include when making an inquiry:
- Inquiry by E-Mail