USB

Connects to Digital still camera/Camcorder/USB storage media.

Note

• Connecting a large USB device may interfere with other devices connected next to it. In such a case, connect it to the other USB input.

HDMI 输入

Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

HDMI 输入 (4K 120 Hz)

If you use an HDMI device that supports video output in 4K 100/120 Hz, connect the Ultra High Speed HDMI™ Cable, and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

Note

• 4K 100 Hz support depends on your country/region.

HDMI 输入 (eARC/ARC)

To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labelled “eARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with 数字音频输出（光纤）.

Hint

There may be three tactile dots, next to the HDMI input terminal depending on your model. Use them as a guide during installation.

or

数字音频输出（光纤）

Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC using an HDMI cable, you need to connect an optical audio cable to the 数字音频输出（光纤） to output digital sound.
For details, refer to Digital optical cable connection in Connecting an audio system.

Note

• The terminal vary depending on your model.
• Optical audio output and S-中置扬声器输入 share the same terminal or have one terminal each individually (two terminals in total).
• For a model that requires sharing of one single terminal, use the Digital audio connector adapter that comes with the TV to apply as an optical audio output.

S-中置扬声器输入

Connects the TV and an audio device with an S-CENTER OUT output/jack using a TV centre speaker mode cable. Before connecting, make sure you unplug the AC power cord (mains lead) of the TV and audio device to be connected.
For details, refer to Using the TV as a centre speaker.

Note

If you do not use the 中置扬声器输入 terminal or the S-中置扬声器输入 input, you will need to perform the following steps to prevent noise from the speakers.

• Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].

  Jump to the Settings screen

• Optical audio output and S-中置扬声器输入 share the same terminal or have one terminal each individually (two terminals in total).

Hint

There may be two tactile dots, next to the S-中置扬声器输入 terminal depending on your model. Use them as a guide during installation.

(Cable/Antenna input)

Connects to Cable/Antenna/External Box.

Note

• When connecting the cable to the Cable/Antenna input, finger tighten only. Over tightening the connection can damage the TV.

LAN

Connect to a Router.
Connect to the Internet using a LAN cable.

中置扬声器输入

To use your TV speakers as the centre speaker, connect the output of your AV receiver to the 中置扬声器输入 on your TV.
To use your TV speakers as the centre speaker, press the (Quick Settings) button on the remote control, then select [Settings] — [Display & Sound] — [Audio output] — [Speakers] — [Audio system].

Jump to the Settings screen

Note

• Before connecting cables, disconnect the AC power cord (mains lead) of both the TV and AV receiver.

• If you do not use the 中置扬声器输入 terminal or the S-中置扬声器输入 input, change the following setting to prevent noise from the speakers.

  Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].

  Jump to the Settings screen