USB

Connects to Digital still camera/Camcorder/USB storage media.

Note

• Connecting a large USB device may interfere with other devices connected next to it. In such a case, connect it to the other USB input.

HDMI IN

Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

HDMI IN (4K 120 Hz)

If you use an HDMI device that supports video output in 4K 100/120 Hz, connect the Ultra High Speed HDMI™ Cable, and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

Note

• 4K 100 Hz support depends on your country/region.

HDMI IN (eARC/ARC)

To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labelled “eARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).

Hint

There may be three tactile dots, next to the HDMI input terminal depending on your model. Use them as a guide during installation.

DIGITAL AUDIO OUT (OPTICAL)

Connects to an audio system with optical audio input.
When connecting an audio system not compatible with eARC/ARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
For details, refer to Digital optical cable connection in Connecting an audio system.

Note

• Optical audio output and S-CENTER SPEAKER IN​ share the same terminal. To use as optical audio output, use the Digital audio connector adapter supplied with the TV.

S-CENTER SPEAKER IN​

Connects the TV and an audio device with an S-CENTER OUT output/jack using a TV centre speaker mode cable. Before connecting, make sure you unplug the AC power cord (mains lead) of the TV and audio device to be connected.
For details, refer to Using the TV as a centre speaker .

Note

If you do not use the CENTER SPEAKER IN terminal or the S-CENTER SPEAKER IN​ input, you will need to perform the following steps to prevent noise from the speakers.

• Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].

  Jump to the Settings screen

• Optical audio output and S-CENTER SPEAKER IN​ share the same terminal.

Hint

There may be two tactile dots, next to the S-CENTER SPEAKER IN​ terminal depending on your model. Use them as a guide during installation.

(Cable/Antenna input)

Connects to Cable/Antenna/External Box.

Note

• When connecting the cable to the Cable/Antenna input, finger tighten only. Over tightening the connection can damage the TV.

(Satellite input)

Connects to satellite input.

Note

• Only models with satellite function.
• When connecting the cable to the Satellite input, finger tighten only. Over tightening the connection can damage the TV.

LAN

Connect to a Router.
Connect to the Internet using a LAN cable.