Recording a Program to the USB HDD Device
<TV tuner board installed models>
-
Use a USB cable (A) between the MONITOR ONLY USB port on your VAIO computer (1) and the USB port of the USB HDD device (not supplied) (2).
![](01/01/01/01/01/01/01/01.png)
-
If you connect to a USB port other than the MONITOR ONLY USB port, your VAIO will not recognize the recording device.
-
Press the HOME button on the remote.
![](01/01/01/01/01/01/02/02.png)
-
Select
(Settings), System Settings, Recording Set-up, HDD Registration.
-
Follow the instructions on the screen, and register the device.
-
Press the HOME button on the remote.
-
Select
(TV), Guide.
-
Select the program you want to record from the program list, then select Timer REC.
-
Configure the timer setting, then select Set Timer.
-
USB HDD capacities from 32 GB at minimum to 2 TB at maximum are supported.
-
Connecting a USB HDD device via a USB hub is not supported. Connect it directly to the MONITOR ONLY USB port on your VAIO computer.
-
Any data stored in the USB HDD device will be erased when it is formatted during the registration process.
-
The USB HDD device cannot be used with a PC once it is registered. To enable use of the USB HDD device on a PC, connect it to a USB port (not the MONITOR ONLY USB port), then format it on the PC. [Details] Note that any data in the USB HDD will be erased.
-
A maximum of 8 USB HDD devices can be registered.
-
You can only play back programs recorded in the USB HDD device on your VAIO computer.
-
You can record a program you are currently viewing by pressing the REC button on the remote.
-
If you press the remote MONITOR power button while recording a program, the recording will not be stopped.