Making a call
You can enjoy a hands-free call with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-free Profile) or HSP (Headset Profile), via a BLUETOOTH connection.
- If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP.
- Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions supplied with your mobile phone.
- Connect the speaker with a BLUETOOTH mobile phone.
The
(BLUETOOTH) indicator lights up in blue when the BLUETOOTH connection is established.
When using the stereo pairing function
- Connect to the speaker whose (BLUETOOTH) indicator is lit in blue. In the following steps, operate this speaker, which is connected to the BLUETOOTH mobile phone. Operation during a hands-free call is only available with this speaker.
- Connect to the speaker whose
- Operate the BLUETOOTH mobile phone to make a call.
When you make a call, playback pauses and the dial tone is heard from the speaker. When the receiver takes the call, talk into the microphone of the speaker.
- If no dial tone is heard via the speaker
-
- The speaker may not connect with a BLUETOOTH mobile phone with HFP or HSP. Check the connection status on the BLUETOOTH mobile phone.
- Switch the call device to the speaker by pressing and holding the
(call) button for about 2 seconds.
- Press the VOL (volume) -/+ buttons to adjust the volume.
- To end a call, press the (call) button.
If you were listening to music before the call, playback will resume when the call ends.
If you end a call by operating the BLUETOOTH mobile phone, playback will also resume when the call ends if you were listening to music before the call.
Hint
- If you adjust the volume on the speaker when not talking, the playback volume is adjusted.
- If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.
- During a call, press the VOL (volume) -/+ buttons on the speaker to adjust the volume. In the speaker, the volume of music playback and calling is set independently.
Note
- When using the stereo pairing function, sound of phone call is output from only the speaker whose (BLUETOOTH) indicator is lit in blue.
- Depending on the BLUETOOTH mobile phone, playback may not pause when making a call.
- Use a BLUETOOTH mobile phone at least 50 cm away from the speaker. Noise may result if the speaker and the BLUETOOTH mobile phone are too close.
- If an audio cable is connected to the AUDIO IN jack of the speaker, you cannot listen to music of the BLUETOOTH device. However, when the BLUETOOTH connection is active, the hands-free function is available.