Digital HD Video Camera RecorderHDR-AZ1/RM-LVR2V

Camera

[System]

Video signal:
HDTV
Image device:
1/2.3 type (7.77 mm) Exmor RTM CMOS sensor
Pixel Gross: Approx. 16.8 megapixels
Effective picture resolution (movie): Approx. 11.9 megapixels (16:9)*
Effective picture resolution (still): Approx. 11.9 megapixels (16:9)
Still image max effective: Approx. 11.9 megapixels
Interval photo recording mode: Approx. 2.1 megapixels (16:9)
Lens:
ZEISS Tessar
Aperture: F2.8
Focal distance: f = 2.8 mm
Focal length (35 mm equivalent) (Movie mode): f = 17.1 mm (16:9)*
FOV: 170°*
Camera:
Exposure control: Auto
Minimum illumination: 6 lx (lux)
Image stabilization: Electronic SteadyShot image stabilization
Minimum shooting distance: Approx. 30 cm (11 7/8 in.)
File format:
Movies: MP4: MPEG-4 AVC/H.264, XAVC S: MPEG-4 AVC/H.264
Audio: MPEG-4 AAC-LC 2ch (When recording MP4 movies), LPCM 2ch (When recording XAVC S movies)
Photo: JPEG (DCF Ver. 2.0, Exif Ver. 2.3, MPF Baseline) compliant
Recording media type:
When recording MP4 movies:
Memory Stick Micro (Mark2) media
microSD/SDHC/SDXC memory card (Class4 or faster)
When recording XAVC S movies:
microSDXC card (Class10 or faster)

* SteadyShot set to [OFF]

[Input and Output connectors]

Multi/Micro USB Terminal*: micro-B/USB2.0 Hi-Speed

*Supports Micro USB compatible devices.

[Power]

Power requirements:
Rechargeable battery pack: 3.7 V (NP-BY1 (supplied))
Multi/Micro USB Terminal: 5.0 V
Charging method:
USB charging: DC 5.0 V, 500 mA
Charging time:
Via a computer
NP-BY1 (supplied): Approx. 2 h 25 min.
Via the AC-UD10 (sold separately)
NP-BY1 (supplied): Approx. 2 h 05 min.
Power supply method:
USB power supply (1.5 A or more is recommended)
Power consumption:
1.7 W (when the movie image size is [1920 × 1080/30p])
Battery:
Rechargeable battery pack: NP-BY1 (supplied)
Maximum output voltage: DC 4.2 V
Output voltage: DC 3.7 V
Maximum charge voltage: DC 4.2 V
Maximum charge current: 975 mA
Capacity: 2.4 Wh (640 mAh)
Type: Li-ion

[General]

Waterproof performance: Depth of water 5 m (16 feet), 30 minutes continuously

(In use with the waterproof case (SPK-AZ1))

Splashproof performance: Equivalent to IPX4*

Operating temperature: -5 °C to +40 °C (23 °F to 104 °F)

Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F)

Dimensions: Approx. 24.2 mm × 36.0 mm × 74.0 mm (31/32 in. × 1 7/16 in. × 3 in.)

(W/H/D, excluding protrusions)

Mass: Approx. 48 g (1.7 oz) (camera only)

Mass (when shooting): Approx. 63 g (2.2 oz) (including NP-BY1 (supplied))

Microphone: Stereo

Speaker: Monaural

* Splashproof performance is based on standard testing by Sony.

[Wireless LAN]

Corresponding standard: IEEE 802.11b/g/n

Frequency: 2.4 GHz

Supported security protocols: WPA-PSK/WPA2-PSK

Configuration method: WPS (Wi-Fi Protected Setup)

Access method: Infrastructure Mode

NFC: NFC Forum Type 3 Tag compliant

[Accessories]

Tripod Adaptor
Dimensions: Approx. 14.2 mm × 12.2 mm × 69 mm (9/16 in. × 1/2 in. × 2 3/4 in.)
(W/H/D, excluding protrusions)
Mass: Approx. 12 g (0.43 oz)
Waterproof Case (SPK-AZ1)
Dimensions: Approx. 36.3 mm × 53.2 mm × 80.2 mm (1 7/16 in. × 2 1/8 in. × 3 1/4 in.)
(W/H/D, excluding protrusions)
Mass: Approx. 48 g (1.7 oz)
Pressure-resistance: Depth of water 5 m (16 feet), 30 minutes continuously.
Attachment Buckle
Dimensions: Approx. 47.0 mm × 14.0 mm × 58.5 mm (1 7/8 in. × 9/16 in. × 2 3/8 in.)
(W/H/D, excluding protrusions)
Mass: Approx. 16 g (0.57 oz)
Flat Adhesive Mount
Dimensions: Approx. 53.0 mm × 12.5 mm × 58.5 mm (2 1/8 in. × 1/2 in. × 2 3/8 in.)
(W/H/D, excluding protrusions)
Mass: Approx. 14 g (0.5 oz)
Curved Adhesive Mount
Dimensions: Approx. 53.0 mm × 16.0 mm × 58.5 mm (2 1/8 in. × 21/32 in. × 2 3/8 in.)
(W/H/D, excluding protrusions)
Mass: Approx. 16 g (0.57 oz)

Design and specifications are subject to change without notice.