Digital 4K Video Camera Recorder/Digital HD Video Camera RecorderFDR-X1000V/HDR-AS200V

HDMI settings

Set the HDMI output signal.

  1. Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [HDMI], then press the ENTER button.
  2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button.

    RESOL: Sets the output resolution of the HDMI signal.

    • AUTO: Sets the HDMI resolution signal automatically.
    • 2160p (FDR-X1000V only): Sets the HDMI resolution signal to 2160p.
    • 1080p: Sets the HDMI resolution signal to 1080p.
    • 1080i: Sets the HDMI resolution signal to 1080i.
    • 720p: Sets the HDMI resolution signal to 720p.
    • BACK: Returns to the [HDMI] menu.

    24/60: Sets the output HDMI signal frame rate.

    • 60p: Output HDMI signal is 60p.
    • 24p: Output HDMI signal is 24p.
    • BACK: Returns to the [24/60] menu.

    * Available only when in movie mode (not available when playback).

    * This setting is disabled when VMODE is set to a setting other than 1080 24p.

    * This setting is disabled when the HDMI resolution is set to a setting other than 1080.

    TCOUT: Sends the time code or the user bit information to a device connected with HDMI.

    • ON: Sends the time code or user bit information.
    • OFF: Does not send the time code or user bit information.
    • BACK: Returns to the [TCOUT] menu.

    * Unavailable when [V.FMT] is set to [MP4].

    R.CTL: Controls the recording on a device connected with HDMI.

    • ON: Controls the recording on the device.
    • OFF: Does not control the recording on the device.
    • BACK: Returns to the [R.CTL] menu.

    * Unavailable when [V.FMT] is set to [MP4].

    BACK: Returns to the [HDMI] menu.