USB Power Supply
When connecting the camera to a computer or USB device with the micro USB cable (supplied), the camera can be set so the connected device supplies power to it.
- Press the NEXT button or PREV button to select [SETUP] - [CONFG] - [USBPw], then press the ENTER button.
- Press the NEXT button or PREV button to select the following setting, then press the ENTER button.
ON: Supplies power from a connected device, through the micro USB cable.
OFF: Does not supply power from a connected device, through the micro USB cable.
BACK: Returns to the [USBPw] menu.
Note
- If you change the setting of the USB power supply while the micro USB cable is connected, disconnect the cable, then reconnect.
- Power may not be supplied properly from a USB device with a power supply capacity of less than 1.5 A.
- If you turn the power of the camera on while charging the battery pack, charging stops and power is supplied to the camera from a device connected via USB.
- You can shoot and playback images using USB Power supply, however the battery pack is not charged simultaneously.
How to supply power from a wall outlet (wall socket)
Use the USB charger AC-UD10 (sold separately). To connect the camera to the charger, use the micro USB cable (supplied).