Live-View RemoteRM-LVR2

Error display on the Live-View Remote

If the following messages appear, follow the instructions.

01-01/02-02

Failed to connect the camera to this unit.

  • Signal traffic may be heavy or this unit may be too far from the access point.

01-02

Failed to connect the camera to this unit.

  • Follow the steps in “Connecting this unit to a camera via Wi-Fi (Single connection)” or “Connecting this unit to multiple cameras via Wi-Fi (Multi connection).”

01-03/01-04

Failed to connect the camera to this unit.

  • The camera is not compatible.

03-01/03-02

Failed to connect the camera to this unit.

The camera is not recognized. Follow the steps in “Connecting this unit to a camera via Wi-Fi (Single connection)” or “Connecting this unit to multiple cameras via Wi-Fi (Multi connection).”

  • Signal traffic may be heavy or this unit may be too far from the access point.

02-01/02-03

Camera error

  • Confirm the accessing camera or memory card.

03-03/03-04

Failed to connect the camera to this unit.

  • The camera is not recognized. You need to do some operation on the camera you want to connect.
  • Signal traffic may be heavy or this unit may be too far from the access point.

03-05

Cannot connect to the camera.

  • This unit already has connected to the maximum number of connectable cameras.

    Check the number of cameras you are connecting.

04-03

Request to the camera failed.

  • Check the camera.

05-01

Cannot take images.

  • Check the camera.

05-02/05-04

Cannot start recording.

  • Check the camera.

05-03

Cannot stop recording.

  • Check the camera.

04-04

No response from the camera.

  • Check the camera.
  • Signal traffic may be heavy or this unit may be too far from the access point.

06-01

Failed to format the recording medium.

06-02

The memory card does not support XAVC S movie recording.

  • Use an SDXC memory card faster than Class10 when recording movies in XAVC S.

06-03

The NTSC/PAL setting is different between the recording media and the camera.

  • Change the setting with Switching NTSC/PAL or format the recording media.

07-01/07-02/07-03

Failed to play.

  • There is an abnormality in the recording media.
  • Signal traffic may be heavy or this unit may be too far from the access point.

07-04

Failed to delete the file.

  • Signal traffic may be heavy or this unit may be too far from the access point.

10-01

The camera’s temperature has risen. Turn the power of the camera off and leave the camera alone for 10 minutes or longer.

Code Starting with an E or a C

When a code starting with a letter appears in the monitor, the self-diagnosis of this unit is working.

Since some repairs may be necessary, consult your nearest Sony dealer and inform them of all codes starting with an E or a C.