Connecting to a network via a wireless LAN

Set a Wi-Fi access point to connect the camera to a network via a wireless LAN. For details about the available functions and settings of your access point, see the access point operating instructions or contact the administrator of the access point.

  1. MENU → (Network) → [Wi-Fi] → desired setting.

Menu item details

WPS Push:
If your access point has a Wi-Fi Protected Setup™ (WPS) button, press the button to register the access point to the camera.
Access Point Set. :
You can manually register the SSID name, security system, and password of the access point to the camera.
Display Wi-Fi Info.:
Displays information for the camera such as the MAC address, IP address, etc.

Hint

  • For details on each menu item, see the “Help Guide” for the camera.

To display the QR Code for the MAC address

  • You can import the MAC address of this camera to a smartphone. Use one of the following methods to display the QR Code on the screen, and read the QR Code using the Transfer & Tagging add-on smartphone application.
    • When the camera is turned off, turn the camera on while pressing the (Playback) button.
    • Press the (Delete) button on the [Display Wi-Fi Info.] screen.

    For details on how to read the QR Code using the Transfer & Tagging add-on, refer to the following support page.

    https://support.d-imaging.sony.co.jp/app/transfer/l/macaddress/index.php

    The Transfer & Tagging add-on is only available in certain countries and regions.

Go to Page Top