Connecting to an FTP server

Make the following settings to connect to the selected FTP server.

Connecting the camera to a network

Connecting to a network via a wired LAN
Refer to “ Connecting to a network via a wired LAN .”
Connecting to a network via a wireless LAN
Refer to “Connecting to a network via a wireless LAN.”
Connecting to a network via USB tethering
Refer to “Connecting to a network with your smartphone (USB tethering).”


Enabling the FTP transfer function

MENU → (Network) → [FTP Transfer] → [FTP Transfer Func.] → [FTP Function] → [On].


  • If [Secure Protocol] under [Destination Settings] is set to [On: SFTP], a fingerprint confirmation message will be displayed on the camera only when connecting to the FTP server for the first time. Make sure the fingerprint matches that of the server before connecting to the FTP server.


About the connection status

  • Once the connection has been established, the (FTP connection) icon will appear in the recording standby screen or the playback screen.
  • If connection fails, the (FTP connection) icon appears orange. Select MENU →(Network) → [FTP Transfer] → [FTP Transfer Func.] → [Display FTP Error Info.] and check the displayed error details.


Displaying the connection error information

When the [Connection Error] screen appears, the network connection has been lost. Check the status of the connection with the access point, the settings of the FTP server or the camera, etc. Select MENU → (Network) → [FTP Transfer] → [FTP Transfer Func.] → [Display FTP Error Info.] to display the connection error screen again.

Hint

  • When trying to establish an FTP connection via a wireless LAN, if the camera is not emitting radio waves after entering the FTP Power Save mode, etc., the camera will be disconnected from Wi-Fi.
  • If connecting via a wireless LAN, make sure that you are near the registered access point.
  • You can also establish an FTP connection via a wired LAN even if [Airplane Mode] is set to [On].

Note

  • When connecting via USB tethering, the Wi-Fi function of the camera cannot be used.
  • When a connection error occurs, check the following.
    • Make sure that the wired LAN cable or USB cable is not disconnected and the terminal is inserted correctly.
    • If connecting via a wireless LAN but the registered access point cannot be found, move closer to the registered access point.
    If the cable becomes disconnected or you turn off the camera while connected via USB tethering, you need to select MENU → (Network) → [Tethering Connection] → [Tethering Connection] to connect to the FTP server.
TP1001367436