Connecting with a smartphone by the NFC function
Simply touch your NFC-compatible smartphone to your Walkman to automatically turn on the power of the Walkman, pair the Walkman and the smartphone, and make a Bluetooth connection.
- Make sure that your smartphone has the NFC function.
- Activate the NFC function on your smartphone.
-
Touch the mark of your smartphone (
) to the mark on the right (
) side of your Walkman (
).
Unlock the screen of the smartphone beforehand. Keep touching the smartphone to the mark on your Walkman () until the smartphone responds. - Tap the confirmation screen on your smartphone.
Keep touching your smartphone to your Walkman until the connection is completed.
Your smartphone and your Walkman are paired and connected with each other. When the connection is made, the lamp (
) on the left (
) side of the Walkman blinks twice every 5 seconds.
Hint
- If your smartphone is in a case, the connection may not be made with one touch. Remove the case.
- If you have installed the “NFC Easy Connect” app on your smartphone, make sure that the screen of this app is displayed on the smartphone.
- The smartphone operations mentioned above are examples. Refer to the operating instructions of your smartphone for details.
- The procedure to tap the confirmation screen on your smartphone is required only the first time you make a one-touch connection.
Note
- If you touch your smartphone to the mark on your Walkman () while using the Remote Commander (supplied), the Remote Commander may be turned off. In this case, turn the Remote Commander on again.