Digital Media PlayerNW-ZX2

Connecting to a Wi-Fi network from the settings screen

If your Wi-Fi router does not support WPS (Wi-Fi Protected Setup), turn on the Wi-Fi function, and then make a Wi-Fi connection by selecting a network from the list of available networks.

  1. Swipe the status bar down and tap - [WI-FI].
    Make sure the Wi-Fi function is on. If not, turn on the Wi-Fi function.
  2. Tap the network you want to use from the list.
  3. Enter a password, if needed, and tap [Connect].

Hint

  • If the network SSID of the access point that you want to use is not shown in the network list, add the network manually.
  • If you are connecting to a Wi-Fi network for the first time, select a method for setting up a Wi-Fi connection.
  • When you are in range and the Wi-Fi function is on, your Walkman will automatically reconnect to a network to which you have connected before.
  • To check the MAC address of your Walkman or other Wi-Fi details, swipe the status bar down and tap - [WI-FI] - - [Advanced].

Note

  • Please contact the manufacturer of your Wi-Fi device for information such as how to set the access point.