General Setup (GENERAL)
DEMO (demonstration)
Activates the demonstration: [ON], [OFF].
CLOCK (clock)
Sets the clock: [AUTO <DAB>], [MANUAL].
CAUT ALM (caution alarm)
Activates the caution alarm: [ON], [OFF].
(Available only while the source is off and the clock is displayed.)
BEEP (beep)
Activates the beep sound: [ON], [OFF].
AUTO OFF (auto off)
Shuts off automatically after a certain time when the unit is turned off and the clock is displayed (i.e. press and hold OFF for 1 second): [ON] (30 minutes), [OFF].
STEERING (steering)
Registers/resets the setting of the steering wheel remote control.
(Available only while the source is off and the clock is displayed.)
Item | Detail |
---|---|
STR CONTROL
(steering control) |
Selects the input mode of the connected remote control. To prevent a malfunction, be sure to match the input mode with the connected remote control before use. [CUSTOM] (custom) Input mode for the steering wheel remote control. [PRESET] (preset) Input mode for the wired remote control excluding the steering wheel remote control. (Automatically selected when [RESET CUSTOM] is performed.) |
EDIT CUSTOM
(edit custom) |
Registers the functions (SOURCE, ATT (attenuate), VOL (volume) +/–, SEEK +/–, VOICE, ON HOOK, OFF HOOK) to the steering wheel remote control: ![]() ![]() ![]() ![]() ![]() (Available only when [STR CONTROL] is set to [CUSTOM].) |
RESET CUSTOM
(reset custom) |
Resets the registered functions of the steering wheel remote control: [YES], [NO]. (Available only when [STR CONTROL] is set to [CUSTOM].) |
Note
- While making settings, only button operation on the unit is available. For safety, park your car before making this setting.
- If an error occurs while registering, all the previously-registered information remains. Restart registration from the function where the error occurred.
- This function may not be available on some vehicles. For details on the compatibility of your vehicle, visit the support site.
USB AUTOPLAY (USB auto play)
Activates the USB auto play: [ON], [OFF].
USB MODE (USB mode)
Changes the USB mode: [ANDROID], [MSC/MTP].
(Available only when the USB is selected.)
AF/TA (alternative frequencies/traffic announcement)
Selects the alternative frequencies (AF) and traffic announcement (TA) setting: [AF-ON], [TA-ON], [AF/TA-ON], [AF/TA-OFF].
REGIONAL (regional)
Restricts reception to a specific region: [ON], [OFF].
(Available only when FM is received.)
BTM (best tuning memory)
Presets stations automatically.
(Available only when the radio is selected.)
SEEK BY (seek by)
Sets the search mode for DAB station:
[A-Z] (Search by station name), [STATION GP] (Search by station group).
(Available only when DAB is selected.)
ANNOUNCE (announcement)
Enables broadcast announcements: [ON], [OFF].
(Available when any source is selected.)
SOFTLINK (soft link)
Searches for and tunes to the similar program automatically when the signal of the current program is too weak to receive: [ON], [OFF].
(Available only when DAB is selected.)
ANT-PWR (antenna power)
Supplies power to the DAB antenna (aerial) input terminal: [ON], [OFF].
(Available only when the unit is turned off or DAB is selected.)
AUTOTUNE (auto tune)
Performs an auto tune to update the list of stations in “Quick-BrowZer” mode.
(Available only when DAB is selected.)
FIRMWARE (firmware)
(Available only while the source is off and the clock is displayed.)
Checks/updates the firmware version. For details, visit the support site.
Item | Detail |
---|---|
FW VERSION
(firmware version) |
Displays current firmware version. |
FW UPDATE
(firmware update) |
Enters firmware update process: [YES], [NO]. Updating the firmware takes a few minutes to complete. During the update, do not turn the ignition to the OFF position, nor remove the USB device. |