Identifying parts
When the lens is removed
- Shutter button
- ON/OFF (Power) switch
- Hook for shoulder strap
(N mark)
- This mark indicates the touch point for connecting this product and an NFC-enabled smartphone.
- NFC (Near Field Communication) is an international standard of the short-range wireless communication technology.
- For shooting: W/T (zoom) lever
For viewing:(Index) lever/
(Playback zoom) lever
- AF illuminator/Self-timer lamp
Image sensor position mark
- Flash
- Press the
(Flash pop-up) button to use the flash.
- Press the
- Microphone*
- Lens
- Lens release button
- Mount
- Image sensor**
- Lens contacts**
*Do not cover this part during movie recording.
**Do not touch this part directly.
(Flash pop-up) button
- LCD screen
- You can adjust the LCD screen to an easily viewable angle and shoot from any position.
- You may not be able to adjust the LCD screen angle depending on the type of a tripod you use. In such a case, release the tripod screw once to adjust the LCD screen angle.
- You can adjust the LCD screen to an easily viewable angle and shoot from any position.
- Access lamp
- Memory card/terminal cover
- Wi-Fi sensor (built-in)
- MOVIE (Movie) button
- MENU button
- Control wheel
- ? (In-Camera Guide) button/
(Delete) button
(Playback) button
- Multi/Micro USB Terminal
- Supports Micro USB compatible device.
- Charge lamp
- Memory card slot
- HDMI micro jack
- Battery cover
- Battery eject lever
- Battery insertion slot
- Connection plate cover
- Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below.
- Make sure that the cord is not pinched when you close the cover.
- Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the connection plate into the battery compartment, and then pass the cord through the connection plate cover as shown below.
- Speaker
- Tripod socket hole
- Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.