IC RecorderICD-BX140
Starting to record automatically in response to sound – the VOR function
You can set the VOR (Voice Operated Recording) function to “ON,” to make the IC recorder start recording when the IC recorder detects sound, and pause when no sound is heard, eliminating recording during soundless periods.
- In the stop or recording mode, press MENU to enter the menu mode.
- Press
or
to select “VOR,” and then press
PLAY/ENTER.
- Press
or
to select “ON,” and then press
PLAY/ENTER.
“VOR” is set to “OFF” when you purchase the IC recorder.
- Press
(stop) to exit the menu mode. - Press
REC/PAUSE.
“VOR” and “
” appear in the display window.The recording pauses when no sound is detected and “VOR” and “PAUSE” flash. When the IC recorder detects sound again, the recording starts again.
Descriptions of menu items
You can select one of the menu items available.
ON :
The IC recorder starts recording when it detects sound.
OFF :
The VOR function does not work.
(Initial setting)
Note
- The VOR function is affected by the sound around you. Set “SENS” (microphone sensitivity) in the menu according to the recording conditions. If recording is not satisfactory after you have changed the “SENS” setting, or for an important recording, set “VOR” to “OFF” in the menu.
Hint
- To cancel the VOR function, set “VOR” to “OFF” in step 3.
Go to Page Top