IC RecorderICD-SX733/SX734/SX1000

Inserting a memory card

In addition to the built-in memory, you can record files on a memory card.


  • In this Help Guide, M2™ and microSD cards are generally referred to as a “memory card.” The M2™/microSD card slot is referred to as the “memory card slot.”
  1. In the stop mode, open the cover of the memory card slot.

  2. Insert a memory card securely to the end of the slot until it clicks into place, as described below.

    : Insert an M2™ with the terminal side facing toward you.

    : Insert a microSD card with the label side facing toward you.

  3. Close the cover of the memory card slot.
    Change to Memory Card?” appears on the display.
  4. Press or to select “Yes” or “No,” and then press .


  • If a memory card is not recognized, remove it and then insert it into the IC recorder again.
  • Do not insert any liquid, metal, flammable or any object other than a memory card into the memory card slot. Doing so may cause fire, electric shock, or malfunctions.
  • Before recording, we recommend that you copy all the data stored on the memory card to your computer and format the memory card on the IC recorder so it contains no data.
  • If you insert a memory card while the IC recorder is turned off, you can select the memory to be used with “Select Memory” in the menu when you turn the IC recorder on the next time.
  • The illustrations used in this Help Guide are based on the ICD-SX1000 model. These illustrations may look different from the model you are using, however, the buttons and controls used for operations are the same.


  • To remove the memory card, push the memory card into the slot. When it pops out, remove it from the memory card slot.