You can adjust the exposure under MENU when the exposure compensation dial is set to “0.” Based on the exposure value set by auto exposure, you can make the entire image brighter or darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure compensation).

Based on the exposure value set by auto exposure, you can make the entire image brighter or darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure compensation).

Selects the metering mode that sets which part of the screen to measure for determining the exposure.

When the contrast between the subject and background is high, such as when shooting a backlit subject or a subject near a window, meter the light at a spot where the subject appears to have the appropriate brightness and lock the exposure before shooting.

Sets whether to fix the exposure when you press the shutter button halfway down. Select [Off] to adjust focus and the exposure separately.

Sets whether to apply the exposure compensation value to control both flash light and ambient light, or just ambient light.

The zebra pattern will appear over part of an image if the brightness level of that part meets the IRE level that you set.

You can set whether to display a guide when you change the exposure.

You can set the setting range for the shutter speed, aperture, and exposure compensation values.

You can adjust the exposure using the front dial or rear dial when the exposure compensation dial is set to “0.”

Sets whether to maintain the exposure value set using [Exposure Comp.] when you turn off the power when the exposure compensation dial position is set to “0.”