MDR-HW700DS

The Control for HDMI function (“BRAVIA” Sync) does not work properly.

  • Check the HDMI connection.

  • Set up the Control for HDMI function on the TV. For details, refer to the manual supplied with your TV.

  • Make sure that the connected device is compatible with “BRAVIA” Sync.

  • Check the Control for HDMI settings on the connected device. For details, refer to the manual supplied with the connected device.

  • Make sure that [Control for HDMI:] is set to [On] on the menu of the processor.

  • The Control for HDMI setting has not been changed even though you changed the CONTROL FOR HDMI switch position.
    Changing the CONTROL FOR HDMI switch position is not effected when the processor is turned on. Set the processor to standby mode before you operate the CONTROL FOR HDMI switch.

  • When you are not using an AV amplifier with the processor
    Set the processor to standby mode first, and then set the CONTROL FOR HDMI switch to “MODE1.”

  • When you connect an AV amplifier to the processor
    Set the processor to standby mode first, and then set the CONTROL FOR HDMI switch to “MODE2.” In the Control for HDMI function, only one set of AV amplifier or equivalent devices can be connected to a TV, etc. In the case of “MODE2,” the Control for HDMI function is limited.