Connecting to a paired iPhone
- Unlock the screen of the iPhone.
- Turn on the audio receiver.
Press and hold the multi-function button for about 2 seconds.
Make sure that the indicator (blue) flashes after you release the button.
Check the connection status on the iPhone. If not connected, proceed to step 3.
- Search for this audio receiver on the iPhone.
- Select [Settings].
- Touch [Bluetooth].
- Touch [
] to change it to [
].
- Touch [MUC-M1BT1].
Hint
- The above procedure is an example. For details, refer to the operating instructions supplied with your iPhone.
- If the iPhone was connected with the audio receiver the last time, an HFP/HSP connection is made when you turn on the audio receiver. While the audio receiver is on, you can make an A2DP connection (music playback) by pressing the multi-function button.
Note
- If the audio receiver tries to make a connection with a previously connected BLUETOOTH device, you may not be able to connect to the device you want to. If connection fails, terminate the BLUETOOTH connection from the device that was previously connected.