IC RecorderICD-BX132

Starting to record automatically in response to sound – the VOR function

You can set the VOR (Voice Operated Recording) function to “ON,” to make the IC recorder start recording when the IC recorder detects sound, and pause when no sound is heard, eliminating recording during soundless periods.
  1. In the stop or recording mode, press MENU to enter the menu mode.
  2. Press souni_cue_fr or souni_cue_ff to select “VOR,” and then press souni_playPLAY/ENTER.

  3. Press souni_cue_fr or souni_cue_ff to select “ON,” and then press souni_playPLAY/ENTER.
    VOR” is set to “OFF” when you purchase the IC recorder.
  4. Press souni_stop(stop) to exit the menu mode.
  5. Press souni_recREC/PAUSE.

    VOR” and “” appear in the display window.

    The recording pauses when no sound is detected and “VOR” and “PAUSE” flash. When the IC recorder detects sound again, the recording starts again.

Descriptions of menu items

You can select one of the menu items available.

ON:

The IC recorder starts recording when it detects sound.

OFF:

The VOR function does not work.

(Initial setting)

Note

  • The VOR function is affected by the sound around you. Set “SENS” (microphone sensitivity) in the menu according to the recording conditions. If recording is not satisfactory after you have changed the “SENS” setting, or for an important recording, set “VOR” to “OFF” in the menu.

Hint

  • To cancel the VOR function, set “VOR” to “OFF” in step 3.