Connecting with a computer via a BLUETOOTH connection (Mac)
Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
To use multiple BLUETOOTH devices in combination with the speaker, perform the following pairing procedure for each device.
The pairing information of the BLUETOOTH devices is stored on the speaker when the speaker is turned off.
Supported operation systems
macOS Monterey (version 12.6)
Do the following before starting.
-
Place your computer within 1 m (3.2 ft) of the speaker.
-
Connect the speaker to an AC outlet via a USB AC adaptor (commercially available). Or charge the built-in battery sufficiently.
-
Prepare the operating instructions supplied with the computer for reference.
-
To avoid any sudden loud sound output from the speaker, turn down the volume of both the computer and the speaker or stop music playback.
-
Set the speaker of your computer to on.
If the speaker of your computer is set to
(mute), sound does not output on the BLUETOOTH speaker.
-
When the speaker of your computer is set to on:
-
- Turn on the speaker.
- Check the
(BLUETOOTH) indicator for activity.
When the indicator is double flashing
In the event that the speaker is paired with a BLUETOOTH device for the first time after purchase or in the event after the speaker is initialized (the speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on. Proceed to step
.
When the indicator is flashing slowly
The speaker is searching for BLUETOOTH connections.
-
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing information of other BLUETOOTH devices), proceed to step
.
-
To reconnect the speaker with one of the BLUETOOTH devices that have been paired with the speaker before, proceed to step
.
The speaker will automatically be connected with the computer just by turning on the BLUETOOTH function on the computer.
Depending on the BLUETOOTH device, the speaker may be reconnected with the device right after it is turned on. For details, refer to the operating instructions supplied with your BLUETOOTH device.
When the indicator stays lit
The speaker is already connected with one of the BLUETOOTH devices.
To connect the speaker with another BLUETOOTH device, do either of the following:
-
To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing information of other BLUETOOTH devices), proceed to step
.
-
To reconnect the speaker with one of the BLUETOOTH devices that have been paired with the speaker before, proceed to step
.
The speaker will automatically be connected with the computer just by turning on the BLUETOOTH function on the computer.
-
- Press the
(BLUETOOTH) button.
You hear voice guidance (Pairing) from the speaker and the
(BLUETOOTH) indicator starts double flashing (pairing mode).
- Search for the speaker on the computer.
-
Click [
(System Preferences)] - [Bluetooth] in the taskbar on the right-bottom of the screen.
-
Select [ULT FIELD 1] from the Bluetooth screen, then click [Pair].
-
- Follow the on-screen instructions to establish a BLUETOOTH connection.
When the BLUETOOTH connection is established, you hear the notification sound from the speaker and the activity of the
(BLUETOOTH) indicator changes from flashing to lit.
If the connection attempt fails, repeat the procedure from step
.
- Click the speaker icon in the top-right of the screen and select [ULT FIELD 1] from [Output Device].
You can enjoy playing back music, etc. from your computer.
Hint
-
The above instructions on the computer are provided as an example. For details, refer to the operating instructions supplied with your computer. In addition, not all the computers are tested and found compatible with the above procedure and the procedure is not applicable to home-built computers.
Note
-
The pairing mode of the speaker is released after about 5 minutes and the
(BLUETOOTH) indicator flashes slowly. However, when the speaker has no pairing information, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before finishing the process, repeat from step
.
-
Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
-
Pairing information has been deleted after repair, etc.
-
The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. When a new device is paired in addition to 8 paired devices, the pairing information of the earliest device connected via a BLUETOOTH connection is replaced by the information of the new one.
-
The pairing information with the speaker has been deleted from the BLUETOOTH device.
-
The speaker is initialized.
All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your computer. In this case, erase the pairing information of the speaker on your computer, and then perform the pairing procedure again.
-
-
The speaker can be paired with multiple devices, but can only play music from one paired device at a time.
-
The passkey of the speaker is “0000.” If a passkey besides “0000” is set on the BLUETOOTH device, pairing cannot be done with the speaker.