Print

Adjusting the sound quality

You can configure various settings related to the TV’s sound such as sound quality and sound mode.

Note

  • The actual display may vary or some settings may not be available depending on your model/country/region, TV settings, and the connected device.

Press the HOME button, then select [Settings] — [Display & Sound] — the desired option.

You can change the following settings.

Sound
Adjust settings by input such as the TV or HDMI, and other common settings, to enjoy various sound effects.
You can configure settings such as those below.
Sound mode
Select modes such as [Cinema], [Music], or [Dolby Audio] based on your environment and preferences.
Sound customisation
Adjust sound settings related to each sound mode.
Volume level
Adjust the sound level of current input.
Advanced auto volume
Keeps the volume level constant for all programmes and inputs.
Balance
Adjust the speaker balance.
TV position
Output sound from the TV speakers according to the position of the TV.
Reset
Return all sound settings to factory default settings.
Audio output
Adjust for headphones and audio system.
You can configure settings such as those below.
Speakers
Select TV or external speakers.
TV centre speaker mode
Use the TV speaker as the centre speaker of the home theatre system.
Audio system prioritisation
If enabled, this automatically switches the audio output to a BRAVIA Sync-compatible audio system when the TV is turned on.
Home theatre control
Turns your audio system on, and allows you to control it.
Sound mode sync
The sound field of the specified audio system will switch automatically when the TV's sound mode changes.
A/V sync
Adjust audio and video timing while using a Bluetooth A2DP audio device or a specific audio system connected with HDMI cable.
eARC mode
If [Auto] is selected, high quality audio is output when an eARC supported device is connected to an HDMI port labelled ARC” oreARC/ARC”.
Digital audio out
Configure the output method when outputting digital audio. This setting is available only when [Speakers] is set to [Audio system].
Digital audio out volume
Applied for PCM only. The volume levels between PCM and compressed audio will differ.
Dolby Digital Plus output
Select output for Dolby Digital Plus for audio systems supporting Dolby Digital Plus and ARC. If you use ARC and optical audio out, select [Dolby Digital]. (Dolby Digital Plus will be muted over optical audio out.)

Hint

  • You can also change the [Sound mode] via the Quick Settings while watching TV. For more details, refer to Using the Quick Settings.