Channel Setup
Note
- The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed.
- Satellite features are only available for satellite models.
Analogue Setup
Analogue Auto Tuning: Tunes in all the available analogue channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed. However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).
Manual Programme Preset: Before selecting [TV System]/[Channel]/[AFT]/[Audio Filter]/[Skip]/[Colour System], press PROG +/− to select the programme number with the channel. You cannot select a programme number that is set to [Skip]. [Skip]
Programme/TV System
Presets programme channels manually.
Channel
Selects a channel number.
AFT
Allows you to fine-tune the selected channel manually. When [On] is selected, the fine tuning is performed automatically.
Audio Filter
Improves the sound of individual channels when distortion occurs in mono broadcasts in TV system [B/G], [I], [D/K] and [M].
Note
- You cannot receive stereo or dual sound when [Low]/[High] is selected.
Skip
Skips unused channels.
Colour System
Select the colour system according to the channel.
Signal Level
Displays the signal level for programme currently being watched.
Programme Sorting: Changes the order in which the channels are stored on the TV.
Digital Setup
Digital Tuning:
Digital Auto Tuning
Tunes in the available digital channels. This option allows you to retune the TV after moving houses, or to search for new channels that have been launched by broadcasters.
Auto Tuning Range
Normal: Searches for available channels within your region/country.
Full: Searches for available channels regardless of region/country.
Note
- You can run [Digital Auto Tuning] after moving to a new residence, changing service providers, or to search for newly launched channels.
Programme List Edit
Removes any unwanted digital channels stored on the TV, and changes the order of the digital channels stored on the TV.
Digital Manual Tuning
Tunes the digital channels manually.
Subtitle Setup:
Subtitle Setting
When [For Hard Of Hearing] is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information).
Primary Preferred Language
Select preferred language which subtitles are displayed in.
Secondary Preferred Language
Select secondary preferred language which subtitles are displayed in.
Audio Setup:
Audio type (Audio description)
Normal
Provides normal audio type.
Audio Description
Provides audio description (narration) of visual information if TV channels broadcast such information.
For Hard Of Hearing
Switches to broadcast for the hearing impaired when [For Hard Of Hearing] is selected.
Spoken subtitle
Switches to broadcast for the spoken subtitle audio if TV channels broadcast such information.
Primary Preferred Language
Select the preferred language used for a programme. Some digital channels may broadcast several audio languages for a programme.
Secondary Preferred Language
Select the secondary preferred language used for a programme. Some digital channels may broadcast several audio languages for a programme.
Mixing Level
Adjusts the TV main audio and Audio Description output levels.
Hint
- This option is only available when [Audio Description] in [Audio type (Audio description)] is set.
Guide Setup:
Update Guide in Standby / Networked standby
TV obtains EPG data during standby/networked standby mode.
Technical Setup:
Auto Service Update
Enables the TV to detect and store new digital services as they become available.
Service Replacement
Select [On] to automatically change the channel when broadcaster changes transmission of the viewing programme to a different channel.
Programme List Transfer
Import or export tuned programmes using USB device.
Satellite Setup:
Allows you to automatically tune satellite channels.
Digital Satellite Tuning
Tunes in the available satellite service.
This option allows you to retune the TV after moving houses, or to search for new channels that have been launched by broadcasters.
Note
- You can decide the installation type and set up the tuning options according to setting mentioned below:
Antenna Configuration
Allows you to select the Single Cable Distribution, Fixed Antenna or DiSEqC.
Your satellite installation type may be Single Cable Distribution, Fixed Antenna or DiSEqC.
Single Cable installations enable delivery of satellite programmes for multiple receivers over a single coaxial cable. Each receiver or tuner is allocated one user ‘band’.
DiSEqC installations allow you connect to multiple satellite dishes or LNBs if you have them, and to select between them using the TV control.
Fixed Antenna is usually the simplest installation type, where there is one satellite dish and LNB.
Band
The number of the user band allocated to the TV or tuner.
Band Frequency
The frequency of the user band allocated to the TV or tuner.
Other (General Satellite)
The TV will search for satellite services based on group of general settings.
DiSEqC Control
Settings for controlling additional satellite equipment such as satellite selector switches.
Scan Type
Full Scan performs a scan of all available satellite frequencies.
Network Scan performs a scan based on predefined network parameters.
Manual Scan allows you to set the scan frequency and other transponder parameters.
Hint
- If services are missing after this Network Scan, please perform the full scan.
Satellite Programme List Edit
Removes any unwanted satellite service stored on the TV, and changes the order of the satellite service stored on the TV.
Satellite Auto Service Update
Enables the TV to detect and store new satellite services as they become available.
Manual Service Update (preserves favourites and timers):
Searches for available service update manually.
CA Module Setup:
Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM) and a view card.
CA Module PIN:
Allows you to enter the 8 digits Conditional Access Module (CAM) PIN to be stored in TV.
Delete Service List:
Deletes a service list. Select [Yes] to delete.
Interactive Application Setup:
The interactive application service offers high-quality digital text and graphics, along with advanced options. The service is supported by broadcasters.
Interactive Application
Enables the viewing of programmes featuring interactive services.
Auto Start Application
Launches broadcast-related applications automatically.
Application for (Prog. [current program])
Enables the interactive application service for the current programme.
Note
- The interactive service is only available if provided by the broadcaster.
- Available functions and screen content vary depending on the broadcaster.
FM Radio Setup (for Russia or Ukraine only)
Presets up to 30 FM radio channels that can be received in your area.
Auto Tuning: Allows you to automatically tune and store all the available channels.
FM Radio Presets: Allows you to manually tune and store each available channel one at a time.
Note
- To enable this feature, access to FM Radio mode by using Home (Menu), then preset your desired FM radio channels according to the steps mentioned above. FM Radio