Print

Connecting terminal

The types and shapes of connectors available vary depending on your TV.
For the location of the connectors, refer to the Setup Guide (printed manual).

TerminalDescription
Image of USB port
USB
Connects to Digital still camera/Camcorder/USB storage media.

Note

  • Connecting a large USB device may interfere with other connected devices beside it. In such a case, connect it to the other USB input.
Image of REMOTE RS-232C terminal
REMOTE RS-232C
This terminal is for service use only.
Image of VIDEO IN jack
VIDEO IN
Connects to VCR/Video game equipment/DVD player/Camcorder.
For a composite connection, use an Analogue Extension Cable (not supplied).
For more about the shape of the Analogue Extension Cable, refer to Connecting a Blu-ray or DVD player.
Image of Headphone jack
(Headphone)
Connects to the headphone jack to listen to sound from the TV. Supports 3-pole stereo mini jack only.

Note

  • You cannot output sound from both the headphone and the TV speakers at the same time.
Image of IR Blaster terminal.
IR Blaster
Use your Sony remote control to control your TV box. Connect the IR Blaster Cable to the IR Blaster port on your TV.
Image of HDMI IN terminal.
HDMI IN
Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI Cable(s) and set the [HDMI signal format] to [Enhanced format].
Image of HDMI IN SUPPORT 8K or 4K 120p port
HDMI IN (8K, 4K 120 Hz)
If you use an HDMI device that supports video output in 8K or 4K 100/120 Hz, connect the Ultra High Speed HDMI Cable, and set the [HDMI signal format] of the port to [Enhanced format (8K)].
[Enhanced format (8K)] is available only for HDMI IN ports of models that support 8K.

Note

  • 4K 100 Hz support depends on your country/region.
Image of HDMI IN eARC/ARC portImage of HDMI IN ARC port
HDMI IN (eARC/ARC) or HDMI IN (ARC)
To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labelledeARC/ARCor “ARC on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).
Image of DVI jack
DVI
Connects to DVI - HDMI Adapter/HDMI device.
If the device has a DVI jack, connect it to HDMI IN input supported DVI through a DVI - HDMI adapter interface (not supplied), and connect the device's audio out jack to HDMI AUDIO IN.
Image of HDMI AUDIO IN port
HDMI AUDIO IN
Connects to the DVI - HDMI Adapter/HDMI device.
If the device has a DVI jack, connect it to HDMI IN input supported DVI through a DVI - HDMI adapter interface (not supplied), and connect the device’s audio out jack to HDMI AUDIO IN.
Image of DIGITAL AUDIO OUT (OPTICAL) jack
DIGITAL AUDIO OUT (OPTICAL)
Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC/eARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
Image of ANTENNA terminal
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.

Note

  • When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the connection can damage the TV.
Image of LAN port
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.
Image of COMPONENT IN jack
COMPONENT IN
Connects to VCR/Video game equipment/DVD Player/Camcorder/External Box*1.
Use the component jacks as video jacks if your device only has video output jacks.
When connecting mono equipment, connect to the L(MONO) audio jack (socket).
*1 For an external device which has only SCART AV OUT, use a SCART-RCA adaptor.
Image of COMPONENT IN jack
COMPONENT IN
Connects to DVD Player with component output.
Connects to the component jacks if your device has a component video output.
Image of CENTER SPEAKER IN jack
CENTER SPEAKER IN
To use your TV speakers as the centre speaker, connect the output of your AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the centre speaker, press the HOME button on the remote control, then select [Settings] — [Display & Sound] — [Audio output] — [Speakers] — [Audio system].

Note

  • Before connecting cables, disconnect the AC power cord (mains lead) of both the TV and AV receiver.
  • If you do not use the CENTER SPEAKER IN terminal , change the following setting to prevent noise from the speakers.
    Press the HOME button on the remote control, and disable [TV centre speaker mode] in [Settings] — [Display & Sound] — [Audio output].