Print

Using Wi-Fi Direct to connect to the TV (no wireless router required)

You can connect a device to the TV wirelessly, without using a wireless router, and then stream videos, photos, and music that is stored on your device directly to the TV.

Note

  • Wi-Fi Direct connects smartphones and computers directly to the TV instead of through the Internet, so streaming video content that requires an Internet connection cannot be played back on the TV.
Illustration of content streaming
  1. Press the 主選單 button, then select [Settings] — [Network & Internet] — [Wi‑Fi Direct] — [Wi‑Fi Direct settings].
  2. Select the TV name displayed on the TV screen with the Wi-Fi Direct device.
    If the device does not support Wi-Fi Direct, select the [Show Network (SSID)/Password].
  3. Operate the Wi-Fi Direct/Wi-Fi device to connect with the TV.
  4. Send content from the Wi-Fi Direct/Wi-Fi device to the TV.
    For details, refer to the instruction manual of the device.

If connection is not successful

When the standby screen for the Wi-Fi Direct setting is displayed, select [Show Network (SSID)/Password] and follow the on-screen instructions to complete the set-up.

To connect another device

Follow the steps above to connect devices. Up to 10 devices can be connected at the same time. To connect another device when 10 devices are already connected, disconnect an unnecessary device, then connect the other device.

To change the name of the TV shown on the connected device

Press the 主選單 button, then select [Settings] — [System] — [About] — [Device name].

To list connected devices/deregister devices

Press the 主選單 button, then select [Settings] — [Network & Internet] — [Wi‑Fi Direct] — [Show device list/Delete].

To deregister a device, select the device in the list to delete, then press the (Enter) button. Then, select [Yes] on the confirmation screen.

To deregister all devices, select [Delete all] in the list, then [Yes] in the confirmation display.