 | - USB
- Connects to Digital still camera/Camcorder/USB storage media.
Note- Connecting a large USB device may interfere with other connected devices beside it. In such a case, connect it to the other USB input.
|
 | - REMOTE IR IN / REMOTE
- Connects to the Home Controller. These jacks are for receiving the external control signal. Enables extended control of the TV using RS-232C via the RS-232C and IR IN jacks. RS-232C: Connects to the RS-232C terminal of the home controller. IR IN: Connects to the IR out terminal of the home controller.
Note- Take care to not connect to headphones or an audio system.
|
 | - VIDEO IN
- Connects to VCR/Video game equipment/DVD player/Camcorder.
For a composite connection, use an Analog Extension Cable (not supplied).
For more about the shape of the Analog Extension Cable, refer to Connecting a Blu-ray or DVD player.
|
 |  (Headphone)- Connects to the headphone jack to listen to sound from the TV. Supports 3-pole stereo mini jack only.
Note- You cannot output sound from both the headphone and the TV speakers at the same time.
|
 | - IR Blaster
- Use your Sony remote control to control your cable/satellite box. Connect the IR Blaster Cable (supplied) to the IR Blaster port on your TV.
|
 | - HDMI IN
- Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and set the [HDMI signal format] to [Enhanced format].
|
 | - HDMI IN (8K, 4K 120 Hz)
- If you use an HDMI device that supports video output in 8K or 4K 100/120 Hz, connect the Ultra High Speed HDMI™ Cable, and set the [HDMI signal format] of the port to [Enhanced format (8K)].
[Enhanced format (8K)] is available only for HDMI IN ports of models that support 8K.
Note- 4K 100 Hz support depends on your country/region.
|
  | - HDMI IN (eARC/ARC) or HDMI IN (ARC)
- To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labeled “eARC/ARC” or “ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).
|
 | - DIGITAL AUDIO OUT (OPTICAL)
- Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC/eARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
|
  |  (Cable/Antenna input)- Connects to Cable/Antenna/External Box.
Note- When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the connection can damage the TV.
|
 | - LAN
- Connect to a Router.
Connect to the Internet using a LAN cable.
|
 | - COMPONENT IN
- Connects to VCR/Video game equipment/DVD Player/Camcorder/External Box*1.
Use the component jacks as video jacks if your device only has video output jacks.
When connecting mono equipment, connect to the L(MONO) audio jack (socket).
*1 For an external device which has only SCART AV OUT, use a SCART-RCA adaptor.
|
| - COMPONENT IN
- Connects to DVD Player with component output.
Connects to the component jacks if your device has a component video output.
|
 | - CENTER SPEAKER IN
- To use your TV speakers as the center speaker, connect the output of your AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the center speaker, press the HOME button on the remote control, then select [Settings] — [Display & Sound] — [Audio output] — [Speakers] — [Audio system].Note- Before connecting cables, disconnect the AC power cord (mains lead) of both the TV and AV receiver.
- If you do not use the CENTER SPEAKER IN terminal , change the following setting to prevent noise from the speakers.
Press the HOME button on the remote control, and disable [TV center speaker mode] in [Settings] — [Display & Sound] — [Audio output].
|
