Satellite Installation

1. Press Quick settings > TV options > Settings > Channel > Channel Installation Mode and press OK.
2. Select General Satellite or Preferred Satellite and then go back to Channel.
3. Select Channel Setup > Satellite Re-scan or Satellite Manual Tuning and press OK.

Scan channels with Satellite re-scan

To start Satellite re-scan… 

1. Press Home > Settings > Channel > Channel Installation Mode and press OK.
2. Select General Satellite or Preferred Satellite and then go back to Channel.
3. Select Channel Setup > Satellite re-scan and press OK.
4. Select Next to proceed the scan or select More to find more scan types for different satellite systems. Depending on your satellite system, there are 5 types of Satellite scan modes to select.
   • Single - Scan the channels from single satellite.
   • Tone Burst - Scan the channels from up to 2 satellites.
   • DiSEqC 1.0 - Scan the channels from up to 4 satellites.
   • Unicable I - Scan the channels from up to 2 satellites with up to 8 User Band Number.
   • Unicable II - Scan the channels from up to 4 satellites with up to 32 User Band Number.
     
     
5. Select Next to start the scan immediately with current satellite settings.
6. Select the Satellite name to view and change the satellite settings. Once the satellite settings are confirmed, press Back and select Next to start the scan. 

The satellite setting items include all information of satellites.

• Satellite Status - The item is not allowed to modify when you select Preferred satellite, but allowed in General satellite. Press Navigation keys left or right to set the Status on or off of the selected satellite.
• Satellite selection - The item is only for indicating the name of satellite, not allowed to modify.
• Scan mode - Press Navigation keys left or right to set the scan mode to Full or Network.
• Scan type - Press Navigation keys left or right to set the scan type to All, Only Encrypted Channels or Only Free Channels.
• Store type - Press Navigation keys left or right to set the store type to All, Only Digital Channels or Only Radio Channels.
• LNB configurations - Press OK to view or adjust the LNB configurations for the LNB Power, LNB Frequency, Tone 22KHz, Signal quality and Signal level.
• Transponder - Press OK to adjust the Transponder settings for the Frequency, Symbol Rate and Polarization.
• Signal quality - View the signal quality of the satellite displayed by the value between 0 and 100.
• Signal level - View the signal level of the satellite displayed by the value between 0 and 100.

Scan channels with Satellite manual tuning

Satellite Manual Tuning is used to scan only one satellite by setting the Transponder of selected satellite. In this condition of scanning, only Transponder adjustment is allowed, other setting items are disabled.