Print

Using the TV as a centre speaker (only models with TV centre speaker mode)

Models with a TV centre speaker mode have CENTER SPEAKER IN terminals or S-CENTER SPEAKER IN​ terminals on the back of the TV.

On TVs with S-CENTER SPEAKER IN​ input, you can use the TV as a centre speaker in the following cases.

  • When a sound bar with an S-CENTER OUT output/jack is connected

By using the TV as a centre speaker, conversations sound natural because you can hear them from the screen and its vicinity.

Hint

  • For Acoustic Center Sync supported audio systems with a S-CENTER OUT terminal, refer to the following.
    https://www.sony.net/hav_faq

    https://www.sony.net/hav_faq
    QR code for the Sony support website

  • Some models have both CENTER SPEAKER IN and S-CENTER SPEAKER IN​ terminals.
  1. Connect the TV and Acoustic Center Sync supported sound bar with the TV centre speaker mode cable that was supplied with the supported device.
    Connect the TV center speaker mode cable to the connection terminal on the back of the TV.
    1. TV centre speaker mode cable (supplied with devices such as sound bars that have S-CENTER OUT terminals)

    Note

    • Even when connecting a sound bar with an S-CENTER OUT terminal, it must be connected to the TV with an HDMI cable like a normal sound bar.
    • Also refer to the instruction manual of the audio system with an S-CENTER OUT terminal.
  2. Press the (Quick Settings) button on the remote control, change — [Audio output] to [Audio system].

Note

  • If centre audio is not output from the TV, enable [Settings] — [Display & Sound] — [Audio output] — [TV centre speaker mode].

Connecting an AV receiver with a speaker cable

Connect the TV and AV receiver with a speaker cable.

Connect the speaker cable to the connection terminal at the back of the TV
  1. AV receiver
  2. Speaker cable (not supplied)

Use a speaker cable (not supplied) to connect the AV receiver to the CENTER SPEAKER IN terminal of the TV.
When connecting, make sure to twist the ends of the speaker cable and insert them into the connection terminals of the TV and AV receiver.

The CENTER SPEAKER IN terminal varies depending on the model. Refer to the figures below when connecting the speaker cable.

*Strip about 10 mm (13/32 inches) of insulation from the speaker cable at each end.

Note

  • To prevent the wires of the speaker cable from touching each other, make sure not to strip too much of the speaker cable.
  • Connect the speaker cable properly so that the polarities (+/-) between the TV and AV receiver match.