Print

Registering a USB HDD device

This function is available only in limited regions/countries/TV models.
To use this function, you may need to update the TV's software.

USB HDD recording models have [Recording device setup] in [Settings] — [Channels & Inputs].

Connect and register a USB HDD device to your TV to record digital broadcasts.

Connect the USB HDD device to the TV’s USB port labelled “HDD REC” (if there is a blue USB port, that port supports HDD recording).

Illustration of the connection method
  1. USB HDD device
  2. USB cable (not supplied)
  1. Connect a USB HDD device to the USB port (blue) labelled “HDD REC” on your TV.
  2. Turn the USB HDD device on.
  3. Wait until the screen [USB drive connected] is displayed.
    If the message does not appear you can manually register the USB HDD device from the Settings menu.
  4. Select [Register for recording].
  5. Follow the on-screen instructions to register the USB HDD device.

Note

  • If the message “Can't detect a USB HDD for recording” is displayed during registration in step 4, follow the instructions in the message and check that the USB HDD device for recording is connected to the Super Speed USB port (blue).
    If the USB HDD device for recording is not recognised even after you have checked the connection, you must register the USB HDD device again because it may have already been registered as a device for purposes other than recording. Refer to "The USB HDD device cannot be registered." to register the USB HDD device again for recording.

To register a USB HDD device manually

  1. Press the (Quick Settings) button on the remote control, and select the following.
    [Settings] — [Channels & Inputs] — [Recording device setup] — [HDD registration].

Related topics