Print

Connecting terminal

The types and shapes of connectors available vary depending on your TV.
For the location of the connectors, refer to the Setup Guide (printed manual).

TerminalDescription
Image of USB port
USB
Connects to Digital still camera/Camcorder/USB storage media.

Note

  • Connecting a large USB device may interfere with other connected devices beside it. In such a case, connect it to the other USB input.
Image of Headphone jack
(Headphone)
Connects to the headphone jack to listen to sound from the TV. Supports 3-pole stereo mini jack only.
Image of HDMI IN terminal.
HDMI IN
Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port.
Image of HDMI IN SUPPORT 4K 120p port
HDMI IN (4K 120 Hz)
If you use an HDMI device that supports video output in 4K 100/120 Hz, connect the Ultra High Speed HDMI Cable, and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port.

Note

  • 4K 100 Hz support depends on your country/region.
Image of HDMI IN eARC/ARC port
HDMI IN (eARC/ARC)
To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labelledeARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).
Image of DIGITAL AUDIO OUT (OPTICAL) jack
DIGITAL AUDIO OUT (OPTICAL)
Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.

Note

  • Optical audio output and S-CENTER SPEAKER IN​ share the same terminal.
  • To use as optical audio output, use the Digital audio connector adapter supplied with the TV.
S-CENTER SPEAKER IN​
Connects the TV and an audio device with an S-CENTER OUT output/jack using a TV centre speaker mode cable. Before connecting, make sure you unplug the AC power cord (mains lead) of the TV and audio device to be connected.
For details, refer to Using the TV as a centre speaker.

Note

If you do not use the CENTER SPEAKER IN terminal or the S-CENTER SPEAKER IN​ input, you will need to perform the following steps to prevent noise from the speakers.

  • Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].
  • Optical audio output and S-CENTER SPEAKER IN​ share the same terminal.
Image of ANTENNA terminal
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.

Note

  • When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the connection can damage the TV.
Image of LAN port
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.
Image of CENTER SPEAKER IN jack
CENTER SPEAKER IN
To use your TV speakers as the centre speaker, connect the output of your AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the centre speaker, press the (Quick Settings) button on the remote control, then select [Settings] — [Display & Sound] — [Audio output] — [Speakers] — [Audio system].

Note

  • Before connecting cables, disconnect the AC power cord (mains lead) of both the TV and AV receiver.
  • If you do not use the CENTER SPEAKER IN terminal or the S-CENTER SPEAKER IN​ input, change the following setting to prevent noise from the speakers.
    Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].