Print

Connecting terminal

The types and shapes of connectors available vary depending on your TV.
For the location of the connectors, refer to the Setup Guide (printed manual).
The Setup Guide can also be downloaded from the Support Site.

TerminalDescription
Image of USB port
USB
Connects to Digital still camera/Camcorder/USB storage media.

Note

  • Connecting a large USB device may interfere with other connected devices beside it. In such a case, connect it to the other USB input.
Image of HDMI IN terminal.
HDMI 输入
Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)
Image of HDMI IN SUPPORT 4K 120p port
HDMI 输入 (4K 120 Hz)
If you use an HDMI device that supports video output in 4K 100/120 Hz, connect the Ultra High Speed HDMI™ Cable, and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

Note

  • 4K 100 Hz support depends on your country/region.
Image of HDMI IN eARC/ARC port
HDMI 输入 (eARC/ARC)
To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labelled “eARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with 数字音频输出（光纤）.

Hint

There may be three tactile dots, next to the HDMI input terminal depending on your model. Use them as a guide during installation.

Image of DIGITAL AUDIO OUT (OPTICAL) jack
or
Image of DIGITAL AUDIO OUT (OPTICAL) jackImage of S-CENTER SPEAKER IN jack
数字音频输出（光纤）
Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC using an HDMI cable, you need to connect an optical audio cable to the 数字音频输出（光纤） to output digital sound.

Note

  • The terminal vary depending on your model.
  • Optical audio output and S-中置扬声器输入 share the same terminal or have one terminal each individually (two terminals in total).
  • For a model that requires sharing of one single terminal, use the Digital audio connector adapter that comes with the TV to apply as an optical audio output.
S-中置扬声器输入
Connects the TV and an audio device with an S-CENTER OUT output/jack using a TV centre speaker mode cable. Before connecting, make sure you unplug the AC power cord (mains lead) of the TV and audio device to be connected.
For details, refer to Using the TV as a centre speaker.

Note

If you do not use the 中置扬声器输入 terminal or the S-中置扬声器输入 input, you will need to perform the following steps to prevent noise from the speakers.

  • Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].
  • Optical audio output and S-中置扬声器输入 share the same terminal or have one terminal each individually (two terminals in total).

Hint

There may be two tactile dots, next to the S-中置扬声器输入 terminal depending on your model. Use them as a guide during installation.

Image of ANTENNA terminal
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.

Note

  • When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the connection can damage the TV.
Image of LAN port
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.