Print

Connecting terminal

The types and shapes of connectors available vary depending on your TV.
For the location of the connectors, refer to the Setup Guide (printed manual).

Terminal Description
Image of USB port
USB
Connects to Digital still camera/Camcorder/USB storage media.

Note

  • Connecting a large USB device may interfere with other connected devices beside it. In such a case, connect it to the other USB input.
Image of REMOTE IR IN jack
REMOTE RS-232C / IR IN
Connects to the Home Controller. These jacks are for receiving the external control signal. Enables extended control of the TV using RS-232C via the RS-232C and IR IN jacks.
RS-232C: Connects to the RS-232C terminal of the home controller.
IR IN: Connects to the IR out terminal of the home controller.

Note

  • Take care to not connect to headphones or an audio system.
Image of HDMI IN terminal.
HDMI IN
Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port.
Image of HDMI IN eARC/ARC port
HDMI IN (eARC/ARC)
To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labeled “eARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).

Hint

There may be three tactile dots, next to the HDMI input terminal depending on your model. Use them as a guide during installation.
Image of DIGITAL AUDIO OUT (OPTICAL) jack
DIGITAL AUDIO OUT (OPTICAL)
Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
Image of ANTENNA terminal
(Cable/Antenna input)
Connects to Cable/Antenna/External Box.

Note

  • When connecting the cable to the Cable/Antenna input, finger tighten only, over tightening the connection can damage the TV.
Image of LAN port
LAN
Connect to a Router.
Connect to the Internet using a LAN cable.

Note

  • Depending on the operating environment of the network, connection speed may differ. The communication rate and quality are not guaranteed.