Indicators on the display panel

  1. Input indicator
    Lights up to indicate the current input.

    HDMI
    Digital signals are input through the selected HDMI IN jack.

    ARC
    TV input is selected and Audio Return Channel (ARC) signals are detected.

    COAX
    Digital signals are input through the COAXIAL jack.

    OPT
    Digital signals are input through the OPTICAL jack.

  2. S.OPTIMIZER
    Lights up when the Sound Optimizer function is activated.
  3. D.C.A.C.
    Lights up when the measurement results of the Auto Calibration function are applied.
  4. Dolby Digital Surround indicator (*1)
    The applicable indicator lights up when the receiver is decoding the corresponding Dolby Digital format signals.

    : Dolby Digital

    TrueHD: Dolby TrueHD

  5. DTS(-HD) indicator (*1)
    The applicable indicator lights up when the receiver is decoding the corresponding DTS format signals.

    DTS: DTS

    DTS-HD: DTS-HD

  6. Speaker system indicator
  7. Tuning indicator

    ST
    Lights up when the receiver tunes to a FM stereo broadcast.

  8. HDMI OUT A + B
  9. SLEEP
    Lights up when the sleep timer is activated.
  10. EQ
    Lights up when the equalizer is activated.
  11. D.L.L.
    Lights up when the Digital Legato Linear (D.L.L.) function is activated.
  12. D.R.C.
    Lights up when dynamic range compression is activated.
  13. NEO:6
    Lights up when DTS Neo:6 Cinema/Music decoding is activated.
  14. Dolby Pro Logic indicator (*2)
    The receiver is processing Dolby Pro Logic format signals. This matrix surround decoding technology can enhance input signals.

    PL: Dolby Pro Logic

    PLII: Dolby Pro Logic II

    PLIIx: Dolby Pro Logic IIx

  15. ZONE, ZONE2, ZONE3
    [ZONE2], [ZONE3] or both light up while the power to the corresponding zone is on.
    [ZONE] and [HDMI OUT] light up when the power for HDMI zone is on.
  16. A.P.M.
    Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the D.C.A.C. (Digital Cinema Auto Calibration) function.
  17. UPDATE
    Lights up when new software is available.
  18. Wireless LAN signal strength indicator
    Lights up to show the strength of the wireless LAN signal.

    No signal

    Weak signal

    Moderate signal

    Strong signal

  19. BT
    Lights up when a BLUETOOTH device is connected. Flashes while connecting.
  20. Wired LAN indicator
    Lights up when a LAN cable is connected.

*1 When playing a Dolby Digital or DTS format disc, make sure that you have completed the digital connections and [Input Mode] is not set to [Analog] in the [Input Settings] menu.

*2 These indicators may not light up depending on the speaker pattern setting.

Go to Page Top