Operating with the multi camera control
Operate multiple cameras with the multi connection.
- You can connect up to 5 cameras at the same time with the multi connection.
- There are shooting modes that cannot be set depending on the connected camera. Refer to the instruction manual of the camera.
- You can press the UP/DOWN buttons of this unit to move the cursor and switch the Live-View display on the LCD screen of this unit to the display of any of the connected cameras.
Press the REC/ENTER button of this unit to start recording on all connected cameras.
- Operates according to the shooting mode of the connected camera.
To stop the movie mode, interval photo recording mode, or loop recording mode, press the REC/ENTER button of this unit again.
Note
- The operation command from this unit under multi camera control is sent to all connected cameras. This unit can do the following. Other camera settings such as image quality etc. should be done on the camera.
- Change the recording mode
- Start and stop the movie mode, interval photo recording mode, or loop recording mode
- Operate the shutter to shoot still images
- The reaction time of the connected cameras may differ depending on the situation of each camera. There may be a time lag between the connected cameras when starting recording, etc.
- If one or more of the connected cameras are recording, the REC/Wi-Fi lamp lights up red.
If you press the REC/ENTER button of this unit at this time, the command to stop recording is sent to all the connected cameras.