• Make sure that this unit and your device are turned on and the wireless LAN function of your device is enabled.
• Ambient conditions (obstacles between this unit and your device, electromagnetic interference, wall materials, etc.) may adversely affect the wireless LAN communication range. Change the location of this unit, or move your device and this unit closer together. If the problem is not resolved, press the reset switch for about 1 second to restart the unit, or over 10 seconds to set the unit to the factory default (*).
• This unit and your device may be too far away from each other. Move them closer together.
• The wireless LAN this unit is connected to may have a problem. Consult the network administrator.
• The number of users connected to this unit may have reached the maximum limit (8).
• Equipment that uses the 2.4 GHz frequency band, such as a microwave oven or Bluetooth device, may be in use near this unit. Move such equipment away from this unit, or turn the equipment off.
• When you are using a password to secure connection between this unit and your device, make sure that you are entering the correct password. If you have forgotten the password, restore the factory default settings by pressing reset switch for over 10 seconds (*).
• The wireless LAN function cannot be used while connecting this unit to a computer using a USB cable.
• While connecting this unit to a USB AC adaptor, the SD card inserted in this unit can be read or written via the wireless LAN function; however, the USB device connected to this unit cannot be read or written.

^* It should be noted that all settings on this unit will be initialized by restoring the factory defaults.