Connecting with an NFC-compatible device by one touch (NFC)
By touching the speaker with an NFC-compatible device such as a smartphone or Walkman, etc., the speaker turns on automatically, then proceeds to pairing and BLUETOOTH connection.
- Compatible smartphones
- NFC-compatible smartphones with Android 2.3.3 or later installed
- Compatible Walkman models
- NFC-compatible Walkman models*1
*1 Even if your Walkman is compatible with the NFC function, it may not be able to make a BLUETOOTH connection with the speaker by one touch. For details on the compatible models, refer to the operating instructions supplied with your Walkman.
- NFC
- NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags.
- Thanks to the NFC function, data communication - for example, BLUETOOTH pairing - can be achieved easily by simply touching NFC-compatible devices together (i.e., at the N-mark symbol or location designated on each device).
- Set the NFC function of the device to on.
For details, refer to the operating instructions supplied with the device.
- If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1:
proceed to step 2.
- If your smartphone OS is Android 4.1 or later: proceed to step 4.
- NFC-compatible Walkman models*2: proceed to step 4.
*2 The procedures for the NFC settings may vary depending on Walkman models. For details, refer to the operating instructions supplied with your Walkman.
- If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1:
- Download and install the app “NFC Easy Connect” on the smartphone.
“NFC Easy Connect” is a free Android app you can download from Google Play.
Download the app by searching for “NFC Easy Connect” or access it by using the following two-dimensional code. A fee may be charged to download the app.
To download via the two-dimensional code, a two-dimensional code reader app is required.
Access the following Web site to search for the app:
https://play.google.com/store/apps/details?id=com.sony.easyconnect
Download via the two-dimensional code:
The app may not be downloadable in some countries/regions.
- Start “NFC Easy Connect” on the smartphone.
Make sure that the app screen is displayed.
- Touch the speaker with the device.
Unlock the screen of the device beforehand.
Keep touching the device on the N marked part of the speaker until the device responds.
If the speaker is off, it will turn on when the device touches it.
Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established,
(BLUETOOTH) indicator stays lit.
To disconnect, touch the speaker with the device again.
Note
When using the speaker add function
Touch the speaker where the
(BLUETOOTH) indicator is lit. The device cannot make a BLUETOOTH connection with the speaker where the (BLUETOOTH) indicator is turned off.
Hint
- If you cannot connect the speaker, try the following.
- Start the app on the device and move the device slowly over the N marked part of the speaker.
- If the device is in a case, remove the case.
- Make sure that the app screen is displayed on the device.
- If you touch a device on the speaker, the device terminates the BLUETOOTH connection with the current device (NFC-compatible headset, etc.), and connects with the speaker (One-touch connection switching).
Note
- When an audio cable is connected to the speaker’s AUDIO IN jack while the speaker and the BLUETOOTH device have been connected via BLUETOOTH connection, sound from the BLUETOOTH-connected device is not output from the speaker (the hands-free function is available). To listen to music from the BLUETOOTH device, disconnect the audio cable from the speaker’s AUDIO IN jack.
- If your smartphone is a type that goes into standby mode in response to magnetic force, it may not be able to connected by NFC.